[DesignII] Version 9.23 of DESIGN II for Windows

Lynn McGuire lmc at winsim.com
Wed Oct 5 19:09:57 EDT 2005


This email is to notify you that version 9.23 of DESIGN II for Windows is now
available on our website at www.winsim.com/download.html .

This is a maintenance release of DESIGN II for Windows. This new release
has the following changes:
1. Added the capability to seperately blend crude feed streams onto unique
petroleum fraction ranges. The program now allows for up to 200 partially
blended crude feed streams.
2. Added a new POWer UNIts OUT and DUTy UNIts OUT commands for
selecting the printed dimensional units for heat exchangers and pressure
change modules such as expander, compressor and pumps.
3. Added bottom product Reid Vapor Pressure control to Distill Column
Super algorithm.
4. Added ASTM RVP calculation procedure C when Reid Vapor Pressure
is greater than 26 psi for NGL products.
5. Added the Distill and Refine Column internal streams to the stream data box.
6. Fixed an Excel Results Transfer problem when there were two exchangers
with rating results on the flowsheet.
7. Fixed the elevation pressure drop calculations in a Line module when the
AGA method was used.
8. The Glitsch tray sizing table for Distill and Refine columns is now reported
with the correct tray flooding percent value when the tray diameter is calculated.
9. Miscellaneous small enhancements and fixes (see release notes at http://www.winsim.com/products/relnotes.chm )

If you are on MSS or a Program Usage Agreement, then please download
the new version. The new CDs should start going out in a couple of days.

Please note that we have a web-based tutorial for DESIGN II for Windows at http://www.winsim.com/tutorial/index.htm .

Please note that the Password algorithm was changed for the 9.20 release.
Your new password should have been emailed to the contact person for your
account. If you need a new password, please contact support at winsim.com
with your serial number for your new password if you are on MSS or a Usage
agreement.

You may testdrive the new release by downloading it (36 MB) from our website
and installing it. Run DESIGN II for Windows and a dialog will come up with
your Computer ID and ask you for a Serial Number and Password. You can
get a Serial Number and Password emailed to you from
www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a week basis.

Our next free half day training class will be on Monday, January 30, 2006 at our
office here in Sugar Land, Texas. There are still a couple of seats open. Please
contact admin at winsim.com for more details.

We very much appreciate the testimonials that several customers have sent us
at http://www.winsim.com/testimonials.html .

Sincerely,
Lynn McGuire
President
WinSim Inc.
13333 Southwest Freeway, Suite 130
Sugar Land, Texas 77478
281-565-6700 Phone
281-565-7593 Fax
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com





More information about the DesignII mailing list