Arthur Tunnel and Old Line

NW Mailing List nw-mailing-list at nwhs.org
Tue Jan 7 20:45:14 EST 2014


Thanks for the information. So, was the old alignment possibly used
as a detour around that tunnel while it was daylighted? I guess that
is the main question I have.

Thanks,
Ben Blevins


On 1/7/14, NW Mailing List <nw-mailing-list at nwhs.org> wrote:

> Here is some of the history about the original trackage and improvements in

> question at Arthur.

>

> The old road bed around the ridge is the original V&T route. Moving coal

> began in 1883 and it grew exponentially each year thereafter. By 1887 the

> old line had reached its capacity and the N&W Railroad began to increase

> capacity by making major line changes to lessen curvature and to reduce

> grades.

>

> A major line relocation occurred from Vicker to Pelton (just west of

> Christiansburg). The old line had a severe grade from Grab Creek up to the

> high grould to reach Christiansburg. The new line had a more gradual grade

> of one percent from Vicker to the Alleghany Summit; this was completed by

> 1890. Line relocations occurred on the east side of Christainsburg

> Mountain, too. The map that Bruce gave shows the new line at Arthur was

> completed by the same time since it is dated 1890, and the new line

> eliminated curves and had a short tunnel on the new line.

>

> After the line relocations were underway, the railroad began double

> tracking. In 1890 annual report, it listed 34.5 miles being prepared for

> double tracking to increase capacity. In 1891 the 34.5 miles was double

> tracked which included 12.66 miles from Radford to Christiansburg, and 21.84

> miles from Roanoke to Elliston. This was the first double tracking on the

> N&W.

>

> In 1898 the line from Christiansburg to Elliston began being double tracked

> by the N&W Railway and was done in stages. By 1901, the double track had

> been extended from Elliston to Shawsville Tunnel and from Christiansburg to

> Montgomery. The 1901 annual report lists 4.76 miles of double track was

> added from Shawsville to Arthur and that the 150-foot tunnel at Arthur was

> converted to a deep cut double track. The double track on the eastern slope

> of Christiansburg Mountain was completed in 1905 with the completion of the

> second bore of Montgomery Tunnel.

>

> Bud Jeffries

> ----- Original Message -----

> From: NW Mailing List

> To: NW Mailing List

> Sent: Thursday, January 02, 2014 3:30 PM

> Subject: Arthur Tunnel and Old Line

>

>

> On Thu, Jan 2, 2014 at 10:56 AM, Al wrote:

>

> Bruce,

>

> Can you send that topo directly? I get a 403 error.

>

>

>

> I dropped the maps I downloaded on my N&W site; see

> http://www.brucebharper.info/nwrwy/maps/maps.html for the PDF files from

> 1890, 1932, and 1937, along with the image I cut from the 1890 map that

> shows the three tunnels on the line.

>

>

> It would appear that the original V&T line went around the spur of the

> ridge at Arthur, then the tunnel was bored through the ridge, then the

> tunnel daylighted when the line was expanded from two tracks to three

> starting there and continuing west.

>

>

> Bruce in Blacksburg

>

>

>

>

>

>

> ------------------------------------------------------------------------------

>

>

> ________________________________________

> NW-Mailing-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-mailing-list

> Browse the NW-Mailing-List archives at

> http://list.nwhs.org/pipermail/nw-mailing-list/

>



More information about the NW-Mailing-List mailing list