middle siding signals
NW Mailing List
nw-mailing-list at nwhs.org
Wed Apr 19 11:44:20 EDT 2017
Mr. Powers,
Thank you for your response. I understand your comments on geography. My
remaining question is why would it be advantageous to allow an Eastbound
movement to proceed at restricted speed on the East-bound main and not be
advantageous to do so for an Eastbound movement on the West-bound main?
The layout of the middle siding appears to by symmetrical with respect to
both mains and I am trying to understand why the signalling should be
different.
Thanks for your help,
Jim Cochran
On Wed, Apr 19, 2017 at 8:26 AM, NW Mailing List <nw-mailing-list at nwhs.org>
wrote:
> Jim,
>
> A restricting signal indicates the right to proceed at a restricting
> speed. That aspect does not deal with geography, it deals with trains ahead
> and track circuit continuity. It sits one position above "stop and
> proceed", which only deals with trains ahead - you must stop and then
> proceed at a restricting speed. Below that is "stop and stay". If there is
> a yellow plate with the letter "G" on it below the signal head displaying
> "Stop and stay" on the mast, a train on an ascending grade can pass the
> signal without the stop, ready to stop short of a train ahead. All the
> above very fine delineations of keeping your speed safely in check.
>
> From the photo, I cannot tell what track the furthest EB signal
> controls. If it has a dummy mast to one side of it, it may control the
> center siding, and most likely be like an interlocking home signal and not
> have any aspect allowing a stop and proceed.
>
> Wm J Powers
>
> On 4/19/2017 6:54 AM, NW Mailing List wrote:
>
> I believe the attached photo may show the West end of the middle siding at
> Villamont (confirmation would be appreciated). My question concerns the
> East-bound signals that are visible. The signal for the East-bound main is
> capable of displaying the RESTRICTING aspect while the one for the
> West-bound main is not. In my understanding, one reason for the
> RESTRICTING aspect was to allow a train to proceed without coming to a
> complete stop on a grade where it might have been very hard to start
> again. Since this stretch is signalled for bi-directional running, why
> would the signal for the West bound main not also be capable of showing
> RESTRICTING? It seems like the grade would have been the same for
> East-bound movements regardless of which main they were using. Any
> thoughts?
> Thanks, Jim Cochran
>
> Moderator:
> http://www.nwhs.org/mailinglist/2017/20170419.midpasside.jpg
>
>
> ________________________________________NW-Mailing-List at nwhs.org
> To change your subscription go tohttp://list.nwhs.org/mailman/options/nw-mailing-list
> Browse the NW-Mailing-List archives athttp://list.nwhs.org/pipermail/nw-mailing-list/
>
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
> <#m_9056830978163597122_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> ________________________________________
> NW-Mailing-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-mailing-list
> Browse the NW-Mailing-List archives at
> http://list.nwhs.org/pipermail/nw-mailing-list/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20170419/fe7bd3a3/attachment.html>
More information about the NW-Mailing-List
mailing list