From nw-modeling-list at nwhs.org  Mon Jun 29 17:43:33 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Mon, 29 Jun 2009 17:43:33 -0400
Subject: Help with Steam Engine Decals
In-Reply-To: <592551.54740.qm@web23908.mail.ird.yahoo.com>
References: <592551.54740.qm@web23908.mail.ird.yahoo.com>
Message-ID: <8CBC719C8E1BCBC-EF8-1579@FWM-D03.sysops.aol.com>


 If you can't get help from CHAMP, SignsGalore may be able to help you. 
We have 5 sheets of N&W signs.
When you have finished with CHAMP, let us know what you need. 
If we do not have it, we can make up a sheet for you from the material you have.

Paul Locher, MMR
SignsGalore


 


 

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Sun, Jun 28, 2009 11:56 am
Subject: Re: Help with Steam Engine Decals











I bought several sets of N&W decals from Champ about a year ago. I spoke to the 
former proprietors wife, who stated that they are still in business and will 
remain so until most of the stock is sold off.  Apparently some vendors have 
been buying her stock then reselling it on Ebay, which she finds troubling. 

Matt

Sent from my phone

On Jun 14, 2009, at 5:34 AM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:

Mark,
BRH-46 shows on the Champ on-line list (bronze gold) as still available.
Dave West
Franklin Park IL

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Jun 13, 2009 6:45 PM
To: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Help with Steam Engine Decals

I have recently acquired a few engines and stripped, aligned and  
painted them only to find that I had only one set of decals.  I model  
the pre-WWII era and have a need for up to 20 sets of the old Champ  
BRH-46 set they originally released in 1991.  The Microscale decals I  
had have disintegrated, and the Walthers set is mostly wrong.  I don't  
want to use Duluxe Yaller either.   I have a W-2 and M as well as a  
Y5, and a pile of Powerhouse Y3's to repaint and decal.  The  
Powerhouse bodies need a 4-5 day soak in Lacquer thinner to get the  
paint off but under that is fairly crisp detail.

Mark Lindsey
Stuck in the 1930's
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



      
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090629/f7e07b13/attachment.html>

From nw-modeling-list at nwhs.org  Tue Jun 30 08:25:16 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Tue, 30 Jun 2009 07:25:16 -0500
Subject: Help with Steam Engine Decals
In-Reply-To: <8CBC719C8E1BCBC-EF8-1579@FWM-D03.sysops.aol.com>
Message-ID: <C66F7C6C.4BC8%stacy.m.lindsey@nasa.gov>

I might need help with HU decals from the mid-1930's after I get rolling on that project.
The very small "NORFOLK&WESTERN" in bronze for the streamlined K3 cab is a definite want.

Mark Lindsey
Stuck in the 1930's


On 6/29/09 5:43 PM, "NW Modeling List" <nw-modeling-list at nwhs.org> wrote:

If you can't get help from CHAMP, SignsGalore may be able to help you.
We have 5 sheets of N&W signs.
When you have finished with CHAMP, let us know what you need.
If we do not have it, we can make up a sheet for you from the material you have.

Paul Locher, MMR
SignsGalore


-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Sun, Jun 28, 2009 11:56 am
Subject: Re: Help with Steam Engine Decals



I bought several sets of N&W decals from Champ about a year ago. I spoke to the

former proprietors wife, who stated that they are still in business and will

remain so until most of the stock is sold off.  Apparently some vendors have

been buying her stock then reselling it on Ebay, which she finds troubling.



Matt



Sent from my phone



On Jun 14, 2009, at 5:34 AM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:



Mark,

BRH-46 shows on the Champ on-line list (bronze gold) as still available.

Dave West

Franklin Park IL



-----Original Message-----

From: NW Modeling List <nw-modeling-list at nwhs.org>

Sent: Jun 13, 2009 6:45 PM

To: NW Modeling List <nw-modeling-list at nwhs.org>

Subject: Help with Steam Engine Decals



I have recently acquired a few engines and stripped, aligned and

painted them only to find that I had only one set of decals.  I model

the pre-WWII era and have a need for up to 20 sets of the old Champ

BRH-46 set they originally released in 1991.  The Microscale decals I

had have disintegrated, and the Walthers set is mostly wrong.  I don't

want to use Duluxe Yaller either.   I have a W-2 and M as well as a

Y5, and a pile of Powerhouse Y3's to repaint and decal.  The

Powerhouse bodies need a 4-5 day soak in Lacquer thinner to get the

paint off but under that is fairly crisp detail.



Mark Lindsey

Stuck in the 1930's

________________________________________

NW-Modeling-List at nwhs.org

To change your subscription go to

http://list.nwhs.org/mailman/options/nw-modeling-list

Browse the NW-Modeling-List archives at

http://list.nwhs.org/pipermail/nw-modeling-list/



________________________________________

NW-Modeling-List at nwhs.org

To change your subscription go to

http://list.nwhs.org/mailman/options/nw-modeling-list

Browse the NW-Modeling-List archives at

http://list.nwhs.org/pipermail/nw-modeling-list/









________________________________________

NW-Modeling-List at nwhs.org

To change your subscription go to

http://list.nwhs.org/mailman/options/nw-modeling-list

Browse the NW-Modeling-List archives at

http://list.nwhs.org/pipermail/nw-modeling-list/



________________________________
An Excellent Credit Score is 750. See Yours in Just 2 Easy Steps! <http://pr.atwola.com/promoclk/100126575x1221823281x1201398699/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=JuneExcfooterNO62>


--


Mark Lindsey
ODIN Desktop Support
Cell-202-345-6402




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090630/229399af/attachment.htm>

From nw-modeling-list at nwhs.org  Tue Jun 30 12:58:44 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Tue, 30 Jun 2009 12:58:44 -0400
Subject: Model Contest Entry Form
In-Reply-To: <002801c9f6b6$886549f0$0301a8c0@jim>
References: <002801c9f6b6$886549f0$0301a8c0@jim>
Message-ID: <4A4A4444.1040507@phys.vt.edu>

The Model & Photo contest entry form has been placed on our convention
website in PDF form. You can select it from the menu as "PDF Contest Entry
Form", or use the following direct link.

http://www.nwhs.org/convention/2009roanoke/2009-Contest-Entry-Form-1.pdf

- Roger Link

NW Mailing List wrote:
> Will the model contest entry form be available on line prior to the 
> convention for anyone who would like to get a head start on completing it?
>  
> Jim Brewer
> Glenwood MD
> 
> 
> ------------------------------------------------------------------------
> 
> ________________________________________
> NW-Mailing-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-mailing-list
> Browse the NW-Mailing-List archives at
> http://list.nwhs.org/pipermail/nw-mailing-list/


From nw-modeling-list at nwhs.org  Wed Jul  1 10:25:12 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Wed, 1 Jul 2009 07:25:12 -0700 (PDT)
Subject: 4 truck shay
Message-ID: <777331.63037.qm@web38401.mail.mud.yahoo.com>

MAN!!!!!!
That is REALLY nice! I wish I could do work like that someday!? 
Thank you for sharing that with us.
BIG WALLY 
B'Ham AL


--- On Fri, 6/26/09, NW Modeling List <nw-modeling-list at nwhs.org> wrote:


From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: 4 truck shay
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Date: Friday, June 26, 2009, 9:59 AM


I have just finished building a 4 truck shay after 20 years.
I am going to redo the tender to get one that looks better.

Kurt S. Kramke

[Moderator]
See images at following:
http://nwhs.org/wiki/tiki-browse_image.php?imageId=43
http://nwhs.org/wiki/tiki-browse_image.php?imageId=44
http://nwhs.org/wiki/tiki-browse_image.php?imageId=45

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090701/e6c888ac/attachment.html>

From nw-modeling-list at nwhs.org  Fri Jul  3 23:53:04 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Fri, 3 Jul 2009 20:53:04 -0700 (PDT)
Subject: VGN EL3a Unit Box Cab on ebay
In-Reply-To: <4A44E24F.7030702@phys.vt.edu>
References: <4A44E24F.7030702@phys.vt.edu>
Message-ID: <461937.69760.qm@web55101.mail.re4.yahoo.com>

Just a heads up. Don't see these listed very often.
It's probably being sold by someone on this list, in all likelihood.

Mike Rector



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090703/f140f746/attachment.html>

From nw-modeling-list at nwhs.org  Sat Jul  4 11:38:20 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Sat, 4 Jul 2009 11:38:20 -0400
Subject: HELP!!  Need Brass engine mechanic
In-Reply-To: <11073373.1245725229684.JavaMail.root@elwamui-mouette.atl.sa.earthlink.net>
References: <11073373.1245725229684.JavaMail.root@elwamui-mouette.atl.sa.earthlink.net>
Message-ID: <BA1C6E23-17F6-41CC-8C96-083CE719BDF8@earthlink.net>

I recently bought a NWSL W2 and the Pilliod-Baker Gear looks like it's  
been messed with.  I have tried to get it to work around corners where  
it binded.  It looks like some parts were missing.  Can anybody  
suggest a really good shop/person to fix it?  I really don't want to  
backdate it to Stephenson gear....  I like the Baker-Pilliod gear.

Mark Lindsey
Stuck in the 1930's




On Jun 22, 2009, at 10:47 PM, NW Modeling List wrote:

Message: 3
Date: Sun, 21 Jun 2009 21:27:30 -0500 (CDT)
From: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Re: Northwest Shortlines E2a

I have owned many of these engines and have painted close to 25 of  
them for others. I have never found one that didn't run well. They can  
be noisy as the open gearbox tends to be noisy but every one I've had  
experience with was smooth running and well made. Toby did a good job  
on them. They were well detailed at the time they were introduced but  
some details are dated and could stand being replaced. The class  
lights are the worst detail as far as I'm concerned.

I personally think the E-2 class was a handsome engine and better  
looking than any Pennsy K4 or the N&W E-3.

Enjoy!
Roger Huber

-----Original Message-----
> From: nw-modeling-list-request at nwhs.org
> Sent: Jun 22, 2009 11:00 AM
> To: nw-modeling-list at nwhs.org
> Subject: NW-Modeling-List Digest, Vol 66, Issue 16
>
> Send NW-Modeling-List mailing list submissions to
> 	nw-modeling-list at nwhs.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://six.pairlist.net/mailman/listinfo/nw-modeling-list
> or, via email, send a message with subject or body 'help' to
> 	nw-modeling-list-request at nwhs.org
>
> You can reach the person managing the list at
> 	nw-modeling-list-owner at nwhs.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of NW-Modeling-List digest..."
>
>
> Today's Topics:
>
>  1. Re: PCM/Broadway N&W CF Caboose in HO (NW Modeling List)
>  2. Re: CF Cabooses (NW Modeling List)
>  3. Re: Northwest Shortlines E2a (NW Modeling List)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 21 Jun 2009 19:47:44 -0400
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> Subject: Re: PCM/Broadway N&W CF Caboose in HO
> To: nw-modeling-list at nwhs.org
> Message-ID:
> 	<327a2d880906211647q1fcfe4feyf40a2ce2ac4c645c at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> It has been discussed before, the item has been canceled.   
> Apparently there
> were not enough orders.  I had one on order at my LHS for about  
> forever, at
> least 2.5 years, whenever they were first announced.  If you check  
> out there
> website, I believe the Caboose is no longer there.  The only good  
> news is
> that it looks like in August the SD40-2 hi hood for N&W will be on the
> shelves.  Though I believe this item was originally announced in the  
> fall of
> 06.  So it took them almost three years.  Fortunately on both these  
> items my
> LHS did not require a deposit (since I am a good customer) and he  
> told me
> not to cancel the order.
>
> I split era's.  I love the diesel era of N&W but I do run steam on  
> occasion,
> especially at shows.  Right before the CF caboose was announced, I  
> picked up
> a brass Division Point, N&W caboose factory painted.  But since I  
> have two
> steam freight engines I needed another one.  So, would check ebay  
> from time
> to time and managed to snag two wooden kits, which are now on my to- 
> do list.
>
> A.J. Gemperline
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090621/7f0620cc/attachment.htm 
> >
>
> ------------------------------
>
> Message: 2
> Date: Mon, 22 Jun 2009 03:31:43 +0000 (GMT)
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> Subject: Re: CF Cabooses
> To: NW Modeling List <nw-modeling-list at nwhs.org>
> Message-ID: <181214.63893.qm at web23901.mail.ird.yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Charlie, I was also looking forward to these cabooses, but I've  
> never bought into the pre-order thing.  So I guess indirectly I, and  
> others like me, bear some responsibility.
>
> Will that change my behavior?  Probably not.
>
> I'm still a little perturbed with Broadway as on the back of the CF  
> cancellation, they've recently gone silent on the USRA Light Pacific  
> they'd been dangling (which was to serve as a stand in for an E2).   
> I hear they make good stuff, but as they keep cancelling everything  
> I want, I may never know!
>
> In the meantime, grab an AMB CF kit - not a built-up, but not hard  
> either. And more importantly, they're actually on the shelves!
>
> Matt Goodman
>
> On Jun 18, 2009, at 3:05 PM, NW Modeling List <nw-modeling-list at nwhs.org 
> > wrote:
>
> For those that didn't understand the message I apologize, it should  
> have said "Can anyone tell me if the N&W cabooses by Precision Craft  
> were produced.  I had 5 on order but Walthers says "sold out" and  
> the place I ordered from told me discountinued.  I would have  
> thought these would have sold well since most talk I have heard  
> seemed that people wanted them.
>
> Charlie
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090622/273e1fb2/attachment-0001.html 
> >
>
> ------------------------------
>
> Message: 3
> Date: Sun, 21 Jun 2009 21:27:30 -0500 (CDT)
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> Subject: Re: Northwest Shortlines E2a
> To: nw-modeling-list at nwhs.org
> Message-ID:
> 	<1179011294.257941.1245637650265.JavaMail.root at vms226.mailsrvcs.net>
> Content-Type: text/plain; charset="us-ascii"
>
> An HTML attachment was scrubbed...
> URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090621/33bf208e/attachment.htm 
> >
>
> ------------------------------
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Mailing-List archives at
> http://list.nwhs.org/pipermail/nw-modeling
>
>
> End of NW-Modeling-List Digest, Vol 66, Issue 16
> ************************************************

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

Mark Lindsey
y3a at earthlink.net




From nw-modeling-list at nwhs.org  Sat Jul  4 13:22:53 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Sat, 4 Jul 2009 13:22:53 -0400
Subject: HELP!!  Need Brass engine mechanic
References: <11073373.1245725229684.JavaMail.root@elwamui-mouette.atl.sa.earthlink.net>
	<BA1C6E23-17F6-41CC-8C96-083CE719BDF8@earthlink.net>
Message-ID: <AA38B20BA3A447CDA306FE8FD49922EE@601ek604>

Mark - W-2s didn't have Baker-Pilliod valve gear.  It's Baker valve gear 
with the combination lever hung from the bell crank.

The only N&W engines, AFAIK, to have Baker-Pilliod valve gear were the E-2 
Pacifics as built; they were shortly (probably in the mid-teens) converted 
to Baker valve gear configured like that on the W-2.

Sorry I can't help you with the other problem . . .

EdKing
----- Original Message ----- 
From: "NW Modeling List" <nw-modeling-list at nwhs.org>
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Sent: Saturday, July 04, 2009 11:38 AM
Subject: HELP!! Need Brass engine mechanic


>I recently bought a NWSL W2 and the Pilliod-Baker Gear looks like it's 
>been messed with.  I have tried to get it to work around corners where  it 
>binded.  It looks like some parts were missing.  Can anybody  suggest a 
>really good shop/person to fix it?  I really don't want to  backdate it to 
>Stephenson gear....  I like the Baker-Pilliod gear.
>
> Mark Lindsey
> Stuck in the 1930's
>
>
>
>
> On Jun 22, 2009, at 10:47 PM, NW Modeling List wrote:
>
> Message: 3
> Date: Sun, 21 Jun 2009 21:27:30 -0500 (CDT)
> From: NW Modeling List <nw-modeling-list at nwhs.org>
> Subject: Re: Northwest Shortlines E2a
>
> I have owned many of these engines and have painted close to 25 of  them 
> for others. I have never found one that didn't run well. They can  be 
> noisy as the open gearbox tends to be noisy but every one I've had 
> experience with was smooth running and well made. Toby did a good job  on 
> them. They were well detailed at the time they were introduced but  some 
> details are dated and could stand being replaced. The class  lights are 
> the worst detail as far as I'm concerned.
>
> I personally think the E-2 class was a handsome engine and better  looking 
> than any Pennsy K4 or the N&W E-3.
>
> Enjoy!
> Roger Huber
>
> -----Original Message-----
>> From: nw-modeling-list-request at nwhs.org
>> Sent: Jun 22, 2009 11:00 AM
>> To: nw-modeling-list at nwhs.org
>> Subject: NW-Modeling-List Digest, Vol 66, Issue 16
>>
>> Send NW-Modeling-List mailing list submissions to
>> nw-modeling-list at nwhs.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://six.pairlist.net/mailman/listinfo/nw-modeling-list
>> or, via email, send a message with subject or body 'help' to
>> nw-modeling-list-request at nwhs.org
>>
>> You can reach the person managing the list at
>> nw-modeling-list-owner at nwhs.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of NW-Modeling-List digest..."
>>
>>
>> Today's Topics:
>>
>>  1. Re: PCM/Broadway N&W CF Caboose in HO (NW Modeling List)
>>  2. Re: CF Cabooses (NW Modeling List)
>>  3. Re: Northwest Shortlines E2a (NW Modeling List)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sun, 21 Jun 2009 19:47:44 -0400
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: PCM/Broadway N&W CF Caboose in HO
>> To: nw-modeling-list at nwhs.org
>> Message-ID:
>> <327a2d880906211647q1fcfe4feyf40a2ce2ac4c645c at mail.gmail.com>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> It has been discussed before, the item has been canceled.   Apparently 
>> there
>> were not enough orders.  I had one on order at my LHS for about  forever, 
>> at
>> least 2.5 years, whenever they were first announced.  If you check  out 
>> there
>> website, I believe the Caboose is no longer there.  The only good  news 
>> is
>> that it looks like in August the SD40-2 hi hood for N&W will be on the
>> shelves.  Though I believe this item was originally announced in the 
>> fall of
>> 06.  So it took them almost three years.  Fortunately on both these 
>> items my
>> LHS did not require a deposit (since I am a good customer) and he  told 
>> me
>> not to cancel the order.
>>
>> I split era's.  I love the diesel era of N&W but I do run steam on 
>> occasion,
>> especially at shows.  Right before the CF caboose was announced, I 
>> picked up
>> a brass Division Point, N&W caboose factory painted.  But since I  have 
>> two
>> steam freight engines I needed another one.  So, would check ebay  from 
>> time
>> to time and managed to snag two wooden kits, which are now on my to- do 
>> list.
>>
>> A.J. Gemperline
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: 
>> <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090621/7f0620cc/attachment.htm
>> >
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 22 Jun 2009 03:31:43 +0000 (GMT)
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: CF Cabooses
>> To: NW Modeling List <nw-modeling-list at nwhs.org>
>> Message-ID: <181214.63893.qm at web23901.mail.ird.yahoo.com>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> Charlie, I was also looking forward to these cabooses, but I've  never 
>> bought into the pre-order thing.  So I guess indirectly I, and  others 
>> like me, bear some responsibility.
>>
>> Will that change my behavior?  Probably not.
>>
>> I'm still a little perturbed with Broadway as on the back of the CF 
>> cancellation, they've recently gone silent on the USRA Light Pacific 
>> they'd been dangling (which was to serve as a stand in for an E2).   I 
>> hear they make good stuff, but as they keep cancelling everything  I 
>> want, I may never know!
>>
>> In the meantime, grab an AMB CF kit - not a built-up, but not hard 
>> either. And more importantly, they're actually on the shelves!
>>
>> Matt Goodman
>>
>> On Jun 18, 2009, at 3:05 PM, NW Modeling List <nw-modeling-list at nwhs.org
>> > wrote:
>>
>> For those that didn't understand the message I apologize, it should  have 
>> said "Can anyone tell me if the N&W cabooses by Precision Craft  were 
>> produced.  I had 5 on order but Walthers says "sold out" and  the place I 
>> ordered from told me discountinued.  I would have  thought these would 
>> have sold well since most talk I have heard  seemed that people wanted 
>> them.
>>
>> Charlie
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list
>> Browse the NW-Modeling-List archives at
>> http://list.nwhs.org/pipermail/nw-modeling-list/
>>
>>
>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: 
>> <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090622/273e1fb2/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Sun, 21 Jun 2009 21:27:30 -0500 (CDT)
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: Northwest Shortlines E2a
>> To: nw-modeling-list at nwhs.org
>> Message-ID:
>> <1179011294.257941.1245637650265.JavaMail.root at vms226.mailsrvcs.net>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> An HTML attachment was scrubbed...
>> URL: 
>> <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090621/33bf208e/attachment.htm
>> >
>>
>> ------------------------------
>>
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list
>> Browse the NW-Mailing-List archives at
>> http://list.nwhs.org/pipermail/nw-modeling
>>
>>
>> End of NW-Modeling-List Digest, Vol 66, Issue 16
>> ************************************************
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
>
> Mark Lindsey
> y3a at earthlink.net
>
>
>
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> 



From nw-modeling-list at nwhs.org  Sat Jul  4 15:01:16 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Sat, 04 Jul 2009 14:01:16 -0500 (CDT)
Subject: HELP!!  Need Brass engine mechanic
Message-ID: <1716870657.751441.1246734076608.JavaMail.root@vms228.mailsrvcs.net>

An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090704/bb3fa4bd/attachment.htm>

From nw-modeling-list at nwhs.org  Sun Jul  5 16:31:45 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Sun, 5 Jul 2009 16:31:45 EDT
Subject: Norfolk Southern Mailing List?
Message-ID: <d30.4eae7d37.378267b1@aol.com>

Listers,
 
Is there a mailing list like this or a historical society for Norfolk  
Southern? I have done a couple of searches and keep coming up with the original  
Norfolk Southern. 
 
I have a new Norfolk Southern decal set being released in a few weeks and  
would like to let them know.
 
Thanks,
 
Richard D. Shell
Troutville, VA
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy 
Steps! 
(http://pr.atwola.com/promoclk/100126575x1222887319x1201497660/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jul
yExcfooterNO62)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090705/034232fb/attachment.html>

From nw-modeling-list at nwhs.org  Sun Jul  5 22:55:17 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Sun, 5 Jul 2009 22:55:17 -0400 (EDT)
Subject: Norfolk Southern Mailing List?
Message-ID: <4983675.1246848918340.JavaMail.root@wamui-haziran.atl.sa.earthlink.net>

An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090705/54c932d4/attachment.htm>

From nw-modeling-list at nwhs.org  Sun Jul  5 21:24:41 2009
From: nw-modeling-list at nwhs.org (NW Modeling List)
Date: Mon, 6 Jul 2009 01:24:41 +0000
Subject: Norfolk Southern Mailing List?
In-Reply-To: <d30.4eae7d37.378267b1@aol.com>
References: <d30.4eae7d37.378267b1@aol.com>
Message-ID: <1254895161-1246843388-cardhu_decombobulator_blackberry.rim.net-1846630295-@bxe1004.bisx.prod.on.blackberry>

Richard
I have been unlucky in finding a list as I model norfolk southern. I have purchased a lot of your deals over the years and would be very interested in the new ones.

Jon kelley
Sent on the Sprint? Now Network from my BlackBerry?

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>

Date: Sun, 5 Jul 2009 16:31:45 
To: <nw-modeling-list at nwhs.org>
Subject: Norfolk Southern Mailing List?


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/