From nw-modeling-list at nwhs.org Mon Nov 2 10:28:48 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Mon, 2 Nov 2009 10:28:48 -0500 Subject: HO Layout Suggestions In-Reply-To: <002001ca5aa3$865e8170$931b8450$@net> References: <2077418099.2341101257021026684.JavaMail.root@sz0005a.emeryville.ca.mail.comcast.net> <002001ca5aa3$865e8170$931b8450$@net> Message-ID: For what it's worth????..Sunset, Samhongsa K-3's can often be found on eBay for as little as the $200's and seldom higher than $325. It's a buyer's market these days! Ed Painter - Narrows, VA, currently Russellville, AR From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Saturday, October 31, 2009 10:30 PM To: 'NW Modeling List' Subject: RE: HO Layout Suggestions There are several choices of a 2-8-2 with 63? drivers as a starting point for the chassis. The boiler? Check out the diameter of the courses on a USRA 2-8-8-2 boiler. Pretty much the same, just shorter. Of course you wouldn?t want to waste a Proto Y3, but how about the boiler from an AHM/Rivarossi Y6b? Biggest problem would be moving the cylinders for the 4 wheel lead truck and the new rods this would require. Tender, of course, is now available. Not true when Jim Teese did his E3, but his use of the Bachmann auxiliary (the old one) suggests that the new one would be a good economical starting place. Or you could just rob one from the Proto Y3. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Saturday, October 31, 2009 3:30 PM To: NW Modeling List Subject: Re: HO Layout Suggestions . Sunset offered a K3 by Samhongsa. Bashing a K3 would be a bit more of a project. ________________________________ New Windows 7: Find the right PC for you. Learn more. ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Mon Nov 2 17:33:32 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Mon, 2 Nov 2009 17:33:32 -0500 Subject: Division Point N&W passenger cars BEj Message-ID: <410-220091112223332282@earthlink.net> Hello all; Just an observation. I recently received my Division Point RPO car and due to the numerous postings on the internet was expecting something almost garish. Well, it does not exactly match my Overland "Arrow" cars but given what I have seen in photos and the available tapes/DVDs it is certainly in the ball park. Perhaps I am too easily pleased, but I like it. Just my two cents. Dan Mulhearn Dan and Nina Mulhearn; Pipestem WV dannina1 at earthlink.net Why Wait? Move to EarthLink. -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Tue Nov 3 12:57:12 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Tue, 3 Nov 2009 09:57:12 -0800 (PST) Subject: Division Point N&W passenger cars BEj In-Reply-To: <410-220091112223332282@earthlink.net> Message-ID: <642742.30380.qm@web180113.mail.gq1.yahoo.com> Dan: I agree with you. I received my RPO and yes it is lighter than the Overland cars. However, the color of the RPO is fine with me. To me it looks like a lead based tuscan that is starting to fade.??Harold Davenport? --- On Mon, 11/2/09, NW Modeling List wrote: From: NW Modeling List Subject: RE: Division Point N&W passenger cars BEj To: "NW Modeling List" Date: Monday, November 2, 2009, 5:33 PM Hello all; Just an observation. I recently received my Division Point RPO car and due to the numerous postings on the internet was expecting something almost garish. Well, it does not exactly match my Overland "Arrow" cars but given what I have seen in photos and the available tapes/DVDs it is certainly in the ball park. Perhaps I am too easily pleased, but I like it. Just my two cents. Dan Mulhearn ? Dan and Nina Mulhearn; Pipestem WV dannina1 at earthlink.net Why Wait? Move to EarthLink. ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Tue Nov 3 19:03:04 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Tue, 3 Nov 2009 19:03:04 -0500 Subject: N&W brass passenger car question and update In-Reply-To: <003f01ca5b5e$dc99f090$95cdd1b0$@net> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net> Message-ID: <01f301ca5ce2$2e69f260$8b3dd720$@net> Jim: I am looking plans for both cars. A request was sent to Harold, but has yet to respond. Any help will be great! Thanks, Stephen From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 8:51 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update Division Point update! The BEj baggage car is going to have the "correct red" ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme. I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO business car? Stephen Rineair -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Tue Nov 3 22:56:06 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Tue, 3 Nov 2009 21:56:06 -0600 Subject: N&W brass passenger car question and update In-Reply-To: <01f301ca5ce2$2e69f260$8b3dd720$@net> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net> <01f301ca5ce2$2e69f260$8b3dd720$@net> Message-ID: <000f01ca5d02$bcf793a0$36e6bae0$@net> I'll put that on my "to do" list. BTW, I failed to mention that there eventually was a third diner to XO conversion - the 400(2nd), which later lost its number to an ex-Wabash car and wound up being sold to a private owner who named it "Cannonball". While there were certain similarities to the 101 and 102, the 400 was a quite different car. I probably should work up some plans for it too. Who knows? One of them may end up being my contest entry next year. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Tuesday, November 03, 2009 6:03 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update Jim: I am looking plans for both cars. A request was sent to Harold, but has yet to respond. Any help will be great! Thanks, Stephen From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 8:51 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update Division Point update! The BEj baggage car is going to have the "correct red" ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme. I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO business car? Stephen Rineair -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Wed Nov 4 10:32:41 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 04 Nov 2009 10:32:41 -0500 Subject: N&W brass passenger car question and update In-Reply-To: <000f01ca5d02$bcf793a0$36e6bae0$@net> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net><01f301ca5ce2$2e69f260$8b3dd720$@net> <000f01ca5d02$bcf793a0$36e6bae0$@net> Message-ID: <8CC2B7B2EA415F0-35C4-25658@webmail-d003.sysops.aol.com> I have a Society reprint, done by TLC Publishing, of the passenger car pan book which is a first approximation of these plans of rebuilds. While not to the level of detail which Jim is discussing it gives the floor plan and general appearance. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Tue, Nov 3, 2009 10:56 pm Subject: RE: N&W brass passenger car question and update I?ll put that on my ?to do? list. BTW, I failed to mention that there eventually was a third diner to XO conversion ? the 400(2nd), which later lost its number to an ex-Wabash car and wound up being sold to a private owner who named it ?Cannonball?. While there were certain similarities to the 101 and 102, the 400 was a quite different car. I probably should work up some plans for it too. Who knows? One of them may end up being my contest entry next year.???? Jim Nichols ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Tuesday, November 03, 2009 6:03 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update ? Jim: I am looking plans for both cars.? A request was sent to Harold, but has yet to respond. Any help will be great! Thanks, Stephen ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 8:51 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update ? Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up.???? Jim Nichols ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update ? ?Division Point update! The BEj baggage car is going to have the ?correct red? ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme.? I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO? business car? Stephen Rineair ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Wed Nov 4 11:42:02 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 4 Nov 2009 10:42:02 -0600 Subject: N&W brass passenger car question and update In-Reply-To: <8CC2B7B2EA415F0-35C4-25658@webmail-d003.sysops.aol.com> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net><01f301ca5ce2$2e69f260$8b3dd720$@net> <000f01ca5d02$bcf793a0$36e6bae0$@net> <8CC2B7B2EA415F0-35C4-25658@webmail-d003.sysops.aol.com> Message-ID: <001b01ca5d6d$bca4dd20$35ee9760$@net> Jeff: Which item is that in the Commissary? I probably need to get it. Jim Nichols -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 9:33 AM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update I have a Society reprint, done by TLC Publishing, of the passenger car pan book which is a first approximation of these plans of rebuilds. While not to the level of detail which Jim is discussing it gives the floor plan and general appearance. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Tue, Nov 3, 2009 10:56 pm Subject: RE: N&W brass passenger car question and update From nw-modeling-list at nwhs.org Wed Nov 4 13:30:53 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 04 Nov 2009 13:30:53 -0500 Subject: N&W brass passenger car question and update In-Reply-To: <001b01ca5d6d$bca4dd20$35ee9760$@net> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net><01f301ca5ce2$2e69f260$8b3dd720$@net> <000f01ca5d02$bcf793a0$36e6bae0$@net><8CC2B7B2EA415F0-35C4-25658@webmail-d003.sysops.aol.com> <001b01ca5d6d$bca4dd20$35ee9760$@net> Message-ID: <8CC2B94133FB7BD-5AAC-13B6@webmail-d043.sysops.aol.com> Rats. It's not currently listed. I'll check for description when I get home, maybe Tom Dixon has a cornered one in his warehouse. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Wed, Nov 4, 2009 11:42 am Subject: RE: N&W brass passenger car question and update Jeff: Which item is that in the Commissary? I probably need to get it. Jim Nichols -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 9:33 AM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update I have a Society reprint, done by TLC Publishing, of the passenger car pan book which is a first approximation of these plans of rebuilds. While not to the level of detail which Jim is discussing it gives the floor plan and general appearance. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Tue, Nov 3, 2009 10:56 pm Subject: RE: N&W brass passenger car question and update ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Wed Nov 4 15:40:14 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 4 Nov 2009 12:40:14 -0800 (PST) Subject: N&W brass passenger car question and update In-Reply-To: <01f301ca5ce2$2e69f260$8b3dd720$@net> Message-ID: <133824.72319.qm@web180106.mail.gq1.yahoo.com> I have nothing on these two cars other than what is in the Archive. The Dinners were ACF and Pullman built and all classed DE.? The Business cars are listed under company service but I saw no general arrangement drawings or the cars in question. Harold. --- On Tue, 11/3/09, NW Modeling List wrote: From: NW Modeling List Subject: RE: N&W brass passenger car question and update To: "'NW Modeling List'" Date: Tuesday, November 3, 2009, 7:03 PM Jim: I am looking plans for both cars.? A request was sent to Harold, but has yet to respond. Any help will be great! Thanks, Stephen ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 8:51 PM To: 'NW Modeling List' Subject: RE: N&W brass passenger car question and update ? Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up.???? Jim Nichols ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update ? ?Division Point update! The BEj baggage car is going to have the ?correct red? ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme.? I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO? business car? Stephen Rineair -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Wed Nov 4 17:21:26 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 4 Nov 2009 16:21:26 -0600 Subject: N&W brass passenger car question and update In-Reply-To: <8CC2B94133FB7BD-5AAC-13B6@webmail-d043.sysops.aol.com> References: <011001ca5b22$9c037b50$d40a71f0$@net> <003f01ca5b5e$dc99f090$95cdd1b0$@net><01f301ca5ce2$2e69f260$8b3dd720$@net> <000f01ca5d02$bcf793a0$36e6bae0$@net><8CC2B7B2EA415F0-35C4-25658@webmail-d003.sysops.aol.com> <001b01ca5d6d$bca4dd20$35ee9760$@net> <8CC2B94133FB7BD-5AAC-13B6@webmail-d043.sysops.aol.com> Message-ID: <002601ca5d9d$26473550$72d59ff0$@net> Thanks. If he does, have him send me one. He has my address. Jim -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 12:31 PM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update Rats. It's not currently listed. I'll check for description when I get home, maybe Tom Dixon has a cornered one in his warehouse. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Wed, Nov 4, 2009 11:42 am Subject: RE: N&W brass passenger car question and update Jeff: Which item is that in the Commissary? I probably need to get it. Jim Nichols -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 9:33 AM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update I have a Society reprint, done by TLC Publishing, of the passenger car pan book which is a first approximation of these plans of rebuilds. While not to the level of detail which Jim is discussing it gives the floor plan and general appearance. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Tue, Nov 3, 2009 10:56 pm Subject: RE: N&W brass passenger car question and update ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Wed Nov 4 21:48:11 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 04 Nov 2009 21:48:11 -0500 Subject: N&W brass passenger car question and update In-Reply-To: References: Message-ID: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> Jim, The title is "Norfolk &Western Railway Co. Diagrams of Passenger Equipment"."Revised to 1967". It shows a floor plan and side view including many business cars, some annotated as conversions from DE dining cars. I'm sure Tom Dixon has your address, but I don't have his! Jeff Cornelius In Stuarts Draft -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Wed, Nov 4, 2009 5:21 pm Subject: RE: N&W brass passenger car question and update Thanks. If he does, have him send me one. He has my address. Jim -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 12:31 PM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update Rats. It's not currently listed. I'll check for description when I get home, maybe Tom Dixon has a cornered one in his warehouse. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Wed, Nov 4, 2009 11:42 am Subject: RE: N&W brass passenger car question and update Jeff: Which item is that in the Commissary? I probably need to get it. Jim Nichols -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 9:33 AM To: nw-modeling-list at nwhs.org Subject: Re: N&W brass passenger car question and update I have a Society reprint, done by TLC Publishing, of the passenger car pan book which is a first approximation of these plans of rebuilds. While not to the level of detail which Jim is discussing it gives the floor plan and general appearance. Jeff Cornelius -----Original Message----- From: NW Modeling List To: 'NW Modeling List' Sent: Tue, Nov 3, 2009 10:56 pm Subject: RE: N&W brass passenger car question and update From nw-modeling-list at nwhs.org Wed Nov 4 22:21:46 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Wed, 4 Nov 2009 22:21:46 -0500 Subject: N&W brass passenger car question and update In-Reply-To: <133824.72319.qm@web180106.mail.gq1.yahoo.com> References: <01f301ca5ce2$2e69f260$8b3dd720$@net> <133824.72319.qm@web180106.mail.gq1.yahoo.com> Message-ID: <002901ca5dc7$1b6cf140$5246d3c0$@net> Harold: Should I just wait until DP does the cars? I wonder what data they are using, do you know where they go the plans? Thanks, Stephen From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 3:40 PM To: NW Modeling List Subject: RE: N&W brass passenger car question and update I have nothing on these two cars other than what is in the Archive. The Dinners were ACF and Pullman built and all classed DE. The Business cars are listed under company service but I saw no general arrangement drawings or the cars in question. Harold. Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update Division Point update! The BEj baggage car is going to have the ?correct red? ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme. I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO business car? Stephen Rineair -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Thu Nov 5 10:37:56 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 5 Nov 2009 09:37:56 -0600 Subject: N&W brass passenger car question and update In-Reply-To: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> References: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> Message-ID: <001801ca5e2d$f2f719e0$d8e54da0$@net> Thanks, Jeff. I'll call him. Jim -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 8:48 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update Jim, The title is "Norfolk &Western Railway Co. Diagrams of Passenger Equipment"."Revised to 1967". It shows a floor plan and side view including many business cars, some annotated as conversions from DE dining cars. I'm sure Tom Dixon has your address, but I don't have his! Jeff Cornelius In Stuarts Draft ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Thu Nov 5 14:47:34 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 5 Nov 2009 11:47:34 -0800 (PST) Subject: N&W brass passenger car question and update In-Reply-To: <002901ca5dc7$1b6cf140$5246d3c0$@net> Message-ID: <34490.43299.qm@web180101.mail.gq1.yahoo.com> I don't know where DP got their data. I only sent them the M1 RPO photo. Harold --- On Wed, 11/4/09, NW Modeling List wrote: From: NW Modeling List Subject: RE: N&W brass passenger car question and update To: "'NW Modeling List'" Date: Wednesday, November 4, 2009, 10:21 PM Harold: Should I just wait until DP does the cars? I wonder what data they are using, do you know where they go the plans? Thanks, Stephen ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Wednesday, November 04, 2009 3:40 PM To: NW Modeling List Subject: RE: N&W brass passenger car question and update ? I have nothing on these two cars other than what is in the Archive. The Dinners were ACF and Pullman built and all classed DE.? The Business cars are listed under company service but I saw no general arrangement drawings or the cars in question. Harold. Actually 2 diners were rebuilt into XO business cars (101 & 102) Not aware of any plans available anywhere (although company diagrams may be of help) but they had at least 2 incarnations, eventually with welded sides and sealed windows. Which version do you want plans for? I may be able to work something up.???? Jim Nichols ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Sunday, November 01, 2009 12:39 PM To: nw-modeling-list at nwhs.org Subject: RE: N&W brass passenger car question and update ? ?Division Point update! The BEj baggage car is going to have the ?correct red? ( mistake made at the painters on the M1 RPO). Also the BEj car is going to be done in the later blue scheme.? I understand only 10 blue cars may be produced so order early. Who do I contact about getting plans for the diner car that was built into the XO? business car? Stephen Rineair -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Thu Nov 5 13:16:48 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 5 Nov 2009 13:16:48 -0500 Subject: N&W 60' Greenville cars? In-Reply-To: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> References: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> Message-ID: <004901ca5e44$23e41e20$6bac5a60$@net> Can someone tell me who had the special run of M&W blue ConCor 60' Greenville boxcars done in HO years ago and sold them at one of the conventions? Stephen Rineair-Thanks ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Thu Nov 5 17:50:32 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 5 Nov 2009 17:50:32 -0500 Subject: Alco N&W G-1 2-8-0 Message-ID: <9D0FCBC4-E067-41D1-AEC4-B5C143D5BAEA@daveayers.com> I recently acquired an Alco N&W G-1 2-8-0, HO brass model locomotive. It had a gearbox with zinc disease, which I managed to replace, and a few other, minor, problems. It now runs fine, and looks good to me. I tried Googling the model, without results, and no hits on eBay either. The Brown Book says "quality problems", but not much else. Can someone tell me more about this nice model engine ? Was the G-1 very 'popular on the N&W ? What is the N&W modelers opinion of this model ? Why there is so little info around on the model ? Any idea what the model is worth ? Dave http;//daveayers.com http;//brassbackshop.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Thu Nov 5 22:46:52 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 05 Nov 2009 21:46:52 -0600 (CST) Subject: Alco N&W G-1 2-8-0 Message-ID: <19689301.282294.1257479212517.JavaMail.root@vms076.mailsrvcs.net> An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 00:25:12 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Thu, 5 Nov 2009 23:25:12 -0600 Subject: Alco N&W G-1 2-8-0 In-Reply-To: <9D0FCBC4-E067-41D1-AEC4-B5C143D5BAEA@daveayers.com> References: <9D0FCBC4-E067-41D1-AEC4-B5C143D5BAEA@daveayers.com> Message-ID: <001f01ca5ea1$84002cb0$8c008610$@net> There were very few G1's although they were almost identical to the much larger G class. After the late 1940's, there were only two of them (6 & 7), which were based in Bluefield for use on the Honaker branch, which had bridges that would not support a larger locomotive. They were retired in 1955 and donated, the 6 to Roanoke and the 7 to Bluefield, where both still exist. The model is relatively old, though I don't know the year it was produced. As far as I know, it was done only once, so they don't turn up very often. Value is hard to estimate, but should be pretty good, due to fact that it is rare. Jim Nichols From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Thursday, November 05, 2009 4:51 PM To: NW Modeling List Subject: Alco N&W G-1 2-8-0 I recently acquired an Alco N&W G-1 2-8-0, HO brass model locomotive. It had a gearbox with zinc disease, which I managed to replace, and a few other, minor, problems. It now runs fine, and looks good to me. I tried Googling the model, without results, and no hits on eBay either. The Brown Book says "quality problems", but not much else. Can someone tell me more about this nice model engine ? Was the G-1 very 'popular on the N&W ? What is the N&W modelers opinion of this model ? Why there is so little info around on the model ? Any idea what the model is worth ? Dave http;//daveayers.com http;//brassbackshop.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 00:44:43 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Fri, 06 Nov 2009 00:44:43 -0500 Subject: Query about Tom Dressler In-Reply-To: <8CC2CB81B0CA2C1-8798-1B83A@webmail-m055.sysops.aol.com> References: <8CC2CB81B0CA2C1-8798-1B83A@webmail-m055.sysops.aol.com> Message-ID: <8CC2CBB601E05A9-8798-1BA8E@webmail-m055.sysops.aol.com> In the 70s there was a modeler name Tom Dressler who wrote a few articles on N&W projects for MR and RMC. Have not seen any articles by him in a long time. Anyone know what happened to him? Kit Anderson -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 07:57:40 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Fri, 6 Nov 2009 07:57:40 -0500 Subject: Query about Tom Dressler In-Reply-To: <8CC2CBB601E05A9-8798-1BA8E@webmail-m055.sysops.aol.com> References: <8CC2CB81B0CA2C1-8798-1B83A@webmail-m055.sysops.aol.com> <8CC2CBB601E05A9-8798-1BA8E@webmail-m055.sysops.aol.com> Message-ID: <002601ca5ee0$bd3039a0$3790ace0$@net> Tom passed away in September of 2007. Regards, Todd Arnett From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Friday, November 06, 2009 12:45 AM To: nw-modeling-list at nwhs.org Subject: Query about Tom Dressler In the 70s there was a modeler name Tom Dressler who wrote a few articles on N&W projects for MR and RMC. Have not seen any articles by him in a long time. Anyone know what happened to him? Kit Anderson -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 16:13:28 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Fri, 6 Nov 2009 13:13:28 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <001f01ca5ea1$84002cb0$8c008610$@net> Message-ID: <854722.19377.qm@web180516.mail.gq1.yahoo.com> I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. ? They said their marketing & research dept didn't see any need for these paint schemes. ? I had planned to buy?4 or 5?and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! ? Roger Huber ? -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 16:06:30 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Fri, 6 Nov 2009 13:06:30 -0800 (PST) Subject: Alco N&W G-1 2-8-0 In-Reply-To: <001f01ca5ea1$84002cb0$8c008610$@net> Message-ID: <175253.87665.qm@web180504.mail.gq1.yahoo.com> I was a custom painter for over 20+ years and painted several of the Alco Models N&W G-1s. They were not the best quality engines Alco Models imported! Every one I dealt with had running problems. First off, the gearbox was sloppy and needed to be replaced with one from NWSL or Precision. The second problem I encountered was the large amount of clearance between the axle bearings and the frame slots. This allowed the drivers to move fore and aft which isn't a good thing for running smoothly. The other item I saw was the holes in the rods for the crank screws were too large amplifying the sloppy mechanism problems. A couple required new motors due to burning out. I considered this a result of the poor construction noted and trying to force it to run. The details and workmanship on the boiler and tender seemed to not be anything more than a few parts loose. ? With a new gearbox and some shimming it could be made to run very smoothly and reliably. The N&W didn't have many and they were only kept until the end as Jim Nichols said for the Honaker Branch. They were quite handsome, to me, and I wish they had been better models. ? They show up fairly often on ebay and in some brass shops. I think they are going for prices that do not reflect the quality of the engines as much as the novelty and less-than-common availability of the models. The last one I saw on ebay was over $350 which considering the amount of work to make one work well is way over priced. ? My 2?, Roger Huber? --- On Fri, 11/6/09, NW Modeling List wrote: From: NW Modeling List Subject: RE: Alco N&W G-1 2-8-0 To: "'NW Modeling List'" Date: Friday, November 6, 2009, 5:25 AM There were very few G1?s although they were almost identical to the much larger G class.? After the late 1940?s, there were only two of them (6 & 7), which were based in Bluefield for use on the Honaker branch, which had bridges that would not support a larger locomotive. They were retired in 1955 and donated, the 6 to Roanoke and the 7 to Bluefield, where both still exist. ? The model is relatively old, though I don?t know the year it was produced. As far as I know, it was done only once, so they don?t turn up very often. Value is hard to estimate, but should be pretty good, due to fact that it is rare.???? Jim Nichols ? From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Thursday, November 05, 2009 4:51 PM To: NW Modeling List Subject: Alco N&W G-1 2-8-0 ? I recently acquired an Alco N&W G-1 2-8-0,?HO?brass model locomotive. It had ?a gearbox with zinc disease, which I managed to replace, and a few other, minor, problems. It now runs fine, and looks good to me. I tried Googling the model, without results, and no hits on eBay either. The Brown Book says "quality problems", but not much else. ? Can someone tell me more about this nice model engine ? ? Was the G-1 very 'popular on the N&W ? What is the N&W modelers opinion of this model ? Why there is so little info around on the model ? Any idea what the model is worth ? ? ? Dave http;//daveayers.com http;//brassbackshop.com ? ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Fri Nov 6 21:31:22 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Fri, 6 Nov 2009 18:31:22 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <854722.19377.qm@web180516.mail.gq1.yahoo.com> Message-ID: <789005.20617.qm@web180107.mail.gq1.yahoo.com> Roger: I have contacted Walthers several times on behalf of the N&WHS regarding these pullman cars. At least you got a reply. The second time I proposed that the N&WHS purchase 600 pullman cars painted and lettered for N&W but got no response.? I have given up on Walthers. Like you I plan to paint three for N&W and will purchase a PRR and a RF&P car. Harold Davenport? --- On Fri, 11/6/09, NW Modeling List wrote: From: NW Modeling List Subject: Walthers PS 10-6 Sleeper To: "NW Modeling List" Date: Friday, November 6, 2009, 4:13 PM I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. ? They said their marketing & research dept didn't see any need for these paint schemes. ? I had planned to buy?4 or 5?and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! ? Roger Huber ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sat Nov 7 09:08:07 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sat, 7 Nov 2009 06:08:07 -0800 (PST) Subject: Query about Tom Dressler In-Reply-To: <8CC2CBB601E05A9-8798-1BA8E@webmail-m055.sysops.aol.com> References: <8CC2CB81B0CA2C1-8798-1B83A@webmail-m055.sysops.aol.com> <8CC2CBB601E05A9-8798-1BA8E@webmail-m055.sysops.aol.com> Message-ID: <126788.16464.qm@web55101.mail.re4.yahoo.com> Tom's articles in The Arrow "From the Cab" (forgive me if I got the title wrong) were very, very good reading about his time on the N&W. He was quite a story teller. Not sure what you are looking for, but if you pick up older issues of The Arrow, you will see his monthly (?) column. One that stands out was about running a train from Portsmouth to Columbus and a near accident at a crossing with another railroad. Mike Rector ________________________________ From: NW Modeling List To: nw-modeling-list at nwhs.org Sent: Fri, November 6, 2009 12:44:43 AM Subject: Query about Tom Dressler In the 70s there was a modeler name Tom Dressler who wrote a few articles on N&W projects for MR and RMC. Have not seen any articles by him in a long time. Anyone know what happened to him? Kit Anderson -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sat Nov 7 13:59:46 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sat, 7 Nov 2009 10:59:46 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <854722.19377.qm@web180516.mail.gq1.yahoo.com> References: <854722.19377.qm@web180516.mail.gq1.yahoo.com> Message-ID: <352472.1097.qm@web52503.mail.re2.yahoo.com> Roger, Do you have a certain contact that you were using? If others are going to contact Walthers then we should probably coordinate our efforts by talking with the same person. Thanks, Brian D. ________________________________ From: NW Modeling List To: NW Modeling List Sent: Fri, November 6, 2009 4:13:28 PM Subject: Walthers PS 10-6 Sleeper I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. They said their marketing & research dept didn't see any need for these paint schemes. I had planned to buy 4 or 5 and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! Roger Huber -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sat Nov 7 17:43:34 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sat, 7 Nov 2009 14:43:34 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <789005.20617.qm@web180107.mail.gq1.yahoo.com> Message-ID: <723571.96138.qm@web180507.mail.gq1.yahoo.com> Harold, ? I was certain I wasn't alone wanting the PS 10-6 in N&W and the other roads.. I was also surprised when I got a response from a manufacturer. That seems to be very abnormal these days. I find it hard to believe that manufacturers can't find the time to answer an email, letter or phone call from someone wanting their products. It's so easy to communicate these days compared to letter writing and all. ? I am still waiting for MTH to respond to their website part number problems.. ? I contacted Precision several times about their pending (now cancelled) N&W CF cabin cars. I understand a big part of their cancellation was lack of response from modelers. I find that very hard to believe! I was ready to order several of them but had some questions they wouldn't answer. I think they also gave potential buyers issues with their pay-in-advance system. I just can't buy something of unknown quality from a company sight unseen. ? Division Point also is another "quiet" company that doesn't try to sell their products by helping answer serious questions. ? Oh well...................I have more than enough projects anyway! ? Roger Huber --- On Sat, 11/7/09, NW Modeling List wrote: From: NW Modeling List Subject: Re: Walthers PS 10-6 Sleeper To: "NW Modeling List" Date: Saturday, November 7, 2009, 2:31 AM Roger: I have contacted Walthers several times on behalf of the N&WHS regarding these pullman cars. At least you got a reply. The second time I proposed that the N&WHS purchase 600 pullman cars painted and lettered for N&W but got no response.? I have given up on Walthers. Like you I plan to paint three for N&W and will purchase a PRR and a RF&P car. Harold Davenport? --- On Fri, 11/6/09, NW Modeling List wrote: From: NW Modeling List Subject: Walthers PS 10-6 Sleeper To: "NW Modeling List" Date: Friday, November 6, 2009, 4:13 PM I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. ? They said their marketing & research dept didn't see any need for these paint schemes. ? I had planned to buy?4 or 5?and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! ? Roger Huber ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sat Nov 7 22:38:45 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sat, 7 Nov 2009 19:38:45 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <352472.1097.qm@web52503.mail.re2.yahoo.com> Message-ID: <275141.54902.qm@web180511.mail.gq1.yahoo.com> Brian, ? I contacted Walthers via their website by clicking on Customer Service and then Contact Us. ? The response I got from CS was from Joanne at this email address: ? joannep at walthers.com Hopefully enough people will ask that we can get them to change their minds about doing the S-2. ? Roger Huber --- On Sat, 11/7/09, NW Modeling List wrote: From: NW Modeling List Subject: Re: Walthers PS 10-6 Sleeper To: "NW Modeling List" Date: Saturday, November 7, 2009, 6:59 PM Roger, Do you have a certain contact that you were using? If others are going to contact Walthers then we should probably coordinate our efforts by talking with the same person. Thanks, Brian D. From: NW Modeling List To: NW Modeling List Sent: Fri, November 6, 2009 4:13:28 PM Subject: Walthers PS 10-6 Sleeper I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. ? They said their marketing & research dept didn't see any need for these paint schemes. ? I had planned to buy?4 or 5?and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! ? Roger Huber ? -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sun Nov 8 09:03:59 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sun, 8 Nov 2009 08:03:59 -0600 Subject: Walthers PS 10-6 Sleeper In-Reply-To: <789005.20617.qm@web180107.mail.gq1.yahoo.com> Message-ID: Harold writes ..... second time I proposed that the N&WHS purchase 600 pullman cars painted and lettered for N&W 1 - This is the type of project I feel the NWHS should be doing for Commissary sales.... 2 - Can Jim Nichols or some one express an opinion on ther correctness of the N&W Rapidio cars Mason Cooper -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sun Nov 8 12:17:56 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sun, 8 Nov 2009 12:17:56 -0500 Subject: Walthers PS 10-6 Sleeper In-Reply-To: <275141.54902.qm@web180511.mail.gq1.yahoo.com> References: <352472.1097.qm@web52503.mail.re2.yahoo.com> <275141.54902.qm@web180511.mail.gq1.yahoo.com> Message-ID: <017b01ca6097$69d49c70$3d7dd550$@net> Roger: What color red will they use if we get them to do them? (smiley face!) Stephen From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Saturday, November 07, 2009 10:39 PM To: NW Modeling List Subject: Re: Walthers PS 10-6 Sleeper Brian, I contacted Walthers via their website by clicking on Customer Service and then Contact Us. The response I got from CS was from Joanne at this email address: joannep at walthers.com Hopefully enough people will ask that we can get them to change their minds about doing the S-2. Roger Huber --- On Sat, 11/7/09, NW Modeling List wrote: From: NW Modeling List Subject: Re: Walthers PS 10-6 Sleeper To: "NW Modeling List" Date: Saturday, November 7, 2009, 6:59 PM Roger, Do you have a certain contact that you were using? If others are going to contact Walthers then we should probably coordinate our efforts by talking with the same person. Thanks, Brian D. _____ From: NW Modeling List To: NW Modeling List Sent: Fri, November 6, 2009 4:13:28 PM Subject: Walthers PS 10-6 Sleeper I just got an email from Walthers. I had been in contact with them concerning the approaching HO model of the RF&P PS 10-6 model. I asked if they could also do them as N&W S-2 sleepers (Sussex County, Buchanan County & McDowell County) and the 3 L&N cars in the same plan 4140 series. They said their marketing & research dept didn't see any need for these paint schemes. I had planned to buy 4 or 5 and paint them myself for the N&W and a couple RF&P cars but would prefer to buy them RTR from Walthers. If anyone else would like these cars to be made available from them I would suggest you email, call or write and ask that they be made. Perhaps the marketing & research dept would make us happy! Roger Huber -----Inline Attachment Follows----- ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From nw-modeling-list at nwhs.org Sun Nov 8 13:19:42 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sun, 8 Nov 2009 13:19:42 -0500 Subject: N&W 60' Greenville cars? In-Reply-To: <004901ca5e44$23e41e20$6bac5a60$@net> References: <8CC2BD98C33C14F-2790-B14@webmail-m067.sysops.aol.com> <004901ca5e44$23e41e20$6bac5a60$@net> Message-ID: <018701ca60a0$0aac5360$2004fa20$@net> Thanks to Gary Rolih: Thanks for the info on the Blue Greenville 60' cars and the diagrams of the N&W passenger cars. You have been most helpful! Just to let you know that I had bought all four #'s of the ConCor cars and sold one recently on Ebay. The car kit went for over $52. Maybe the modeling committee could contact Exact Rail and have them do the Greenville in the N&W blue scheme as a built up model (if this is the correct model?). If the committee doesn't want to, then I could contact them myself. Let me know one way or the other. Thanks Stephen -----Original Message----- From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List Sent: Thursday, November 05, 2009 1:17 PM To: 'NW Modeling List' Subject: RE: N&W 60' Greenville cars? Can someone tell me who had the special run of N&W blue ConCor 60' Greenville boxcars done in HO years ago and sold them at one of the conventions? Stephen Rineair-Thanks ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ ________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ From nw-modeling-list at nwhs.org Sun Nov 8 21:00:05 2009 From: nw-modeling-list at nwhs.org (NW Modeling List) Date: Sun, 8 Nov 2009 18:00:05 -0800 (PST) Subject: Walthers PS 10-6 Sleeper In-Reply-To: <275141.54902.qm@web180511.mail.gq1.yahoo.com> Message-ID: <131104.14276.qm@web38706.mail.mud.yahoo.com> I contacted Walthers through their customer service about a years ago suggesting this for both the HO and N versions. http://www.walthers.com/exec/mailcustserv I never got any sort of reply though. Mark Peele Catonsville, MD --- On Sat, 11/7/09, NW Modeling List wrote: > From: NW Modeling List > Subject: Re: Walthers PS 10-6 Sleeper > To: "NW Modeling List" > Date: Saturday, November 7, 2009, 10:38 PM > Brian, > ? > I contacted Walthers via their website by clicking on > Customer Service and then Contact Us. > ? > The response I got from CS was from Joanne at this > email address: > ? > joannep at walthers.com > > Hopefully enough people will ask that we can get them > to change their minds about doing the S-2. > ? > Roger Huber > > --- On Sat, 11/7/09, NW Modeling List > wrote: > > > From: NW Modeling List > Subject: Re: Walthers PS 10-6 Sleeper > To: "NW Modeling List" > > Date: Saturday, November 7, 2009, 6:59 PM > > > > > > > Roger, > > Do you have a certain contact that you were using? If > others are going to contact Walthers > then we should probably coordinate our efforts by talking > with the same person. > > Thanks, > Brian D. > > > > > > From: NW > Modeling List > To: NW > Modeling List > Sent: Fri, > November 6, 2009 4:13:28 PM > Subject: > Walthers PS 10-6 Sleeper > > > > > > > I just got an email from Walthers. I had been in > contact with them concerning the approaching HO model of the > RF&P PS 10-6 model. I asked if they could also do them > as N&W S-2 sleepers (Sussex County, Buchanan County > & McDowell County) and the 3 L&N cars in the same > plan 4140 series. > ? > They said their marketing & research dept > didn't see any need for these paint schemes. > ? > I had planned to buy?4 or 5?and paint them > myself for the N&W and a couple RF&P cars but would > prefer to buy them RTR from Walthers. If anyone else would > like these cars to be made available from them I would > suggest you email, call or write and ask that they be made. > Perhaps the marketing & research dept would make us > happy! > ? > Roger Huber > > ? > > -----Inline Attachment Follows----- > > > ________________________________________ > NW-Modeling-List at nwhs.org > To change your subscription go to > http://list.nwhs.org/mailman/options/nw-modeling-list > Browse the NW-Modeling-List archives at > http://list.nwhs.org/pipermail/nw-modeling-list/ > -----Inline Attachment Follows----- > > ________________________________________ > NW-Modeling-List at nwhs.org > To change your subscription go to > http://list.nwhs.org/mailman/options/nw-modeling-list > Browse the NW-Modeling-List archives at > http://list.nwhs.org/pipermail/nw-modeling-list/