[Woodcarver] New Carver Advice

[su berton]

Hi, there:  I don't know if my message got through the last time; but I have added 3 new portrait relief carvings on page 2 of my site http://www.artabus.com/berton/  Remember to click on the thumbnails.  They aren't great like some of you guys, but I have only been doing this about 4 months now.  You can see a little improvement.  I have a lot to learn.  Su/kingston/Ontario
  ----- Original Message ----- 
  From: Rebarris at cs.com 
  To: woodcarver at six.pairlist.net 
  Sent: Sunday, April 04, 2004 12:33 AM
  Subject: Re: [Woodcarver] New Carver Advice


  To make a DONATION to the List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  In a message dated 4/3/2004 11:27:46 PM Eastern Standard Time, jb04404 at alltel.net writes: 

    A macaroni tool is shaped about like this  [___] (without the little hooks on top, straight edges). The one I use is about mid-size so it is easy to use as a one hand tool, choked up for control, or with a mallet. Long bevel on cutting edges.


       Dog gone hard to sharpen too. Two vee tools.
    Bob Barris 


------------------------------------------------------------------------------



  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20040404/68189ac2/attachment.htm