[Woodcarver] Turn a plate.

[BillRussell]

Paul,
Thank you for sharing the link about the carved woodturnings.  Andi Wolfe has some very beautiful designs carved and burned into his platters and bowls.
Very interesting and exciting to look at. 


Bill Russell
Lockport NY


Please visit my web site:

http://BillsKreativeKindling.com

Pictures of my latest carvings:

http://www.PictureTrail.com/wrussluvs2carve


  ----- Original Message ----- 
  From: Paul Herbeck 
  To: woodcarver at six.pairlist.net 
  Sent: Saturday, February 28, 2004 8:00 AM
  Subject: Re: [Woodcarver] Turn a plate.


  To make a DONATION to the List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  If you like carving on woodturning, you might want to check out the following site:




  http://www.biosci.ohio-state.edu/~awolfe/COW/wolfe.html


  Paul Herbeck
  Columbus, OH
  >From: "vze1v7fy" >Reply-To: "[Woodcarver]" >To: "[Woodcarver]" >Subject: Re: [Woodcarver] Turn a plate. >Date: Thu, 26 Feb 2004 23:01:56 -0500 > >To make a DONATION to the List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html >Glad I'm not alone on this carving/wood turning dilemma. Found whole areas >of wood I've been hording just for wood turning and didn't realize it. Have >a few small vases ready for some free style chip carving or spirit faces. >Turned three N.A. flutes so far... only lost one and that was do to the >chambers being off center to begin with. > >When I first got the lathe it needed some TLC. I deliberately left it apart >so I could get some carving commissions finished. As soon as the >commissions were done the lathe went back together and I fi lled two garbage >bags with shavings just from practice. Bowls with carved rims are next! > >Mike, I like those pens. Thanks for the warning on the one Woodcarft kit. >My daughter wants a pen and picked out that one. I already did a Robusto >Jr. in curly spalted Myrtle. The next one is for a friend. > >Keep on Carvin' >-Mike Bloomquist-> > > > > > >----- Original Message ----- >From: "Larry Robertson" >To: "[Woodcarver]" >Sent: Thursday, February 26, 2004 9:10 AM >Subject: [Woodcarver] Turn a plate. > > > > To make a DONATION to the List using PayPal OR regular mail, click this >link: http://wwwoodcarver.com/WWWList/WWWList.html > > > > Loren Woodard wrote: "I'd love to turn a plate like yours some day." > > ______ > > Careful when turning stuff. Turning is the potato chips of woodworking. > > Once you start its hard to quit. My plan is to somehow combine the two by > > carving on turnings or something like that. > > > > Larry Robertson > > Colchester, Ontario > > WorkingInWood > > ----- Original Message ----- > > From: "Loren Woodard" > > To: "[Woodcarver]" > > Sent: Wednesday, February 25, 2004 6:00 PM > > Subject: Re: [Woodcarver]Digital Photos, PTrail, and Finish > > > > > > _______________________________________________ > > Woodcarver mailing list > > Woodcarver at six.pairlist.net > > http://six.pairlist.net/mailman/listinfo/woodcarver > > > > >_______________________________________________ >Woodcarver mailing list >Woodcarver at six.pairlist.net >http://six.pairlist.net/mailman/listinfo/woodcarver 


------------------------------------------------------------------------------
  Watch high-quality video with fast playback at MSN V ideo. Free! 


------------------------------------------------------------------------------



  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20040228/0c1c4d8b/attachment.htm