[Woodcarver] Tools

[Mike & Patty Wilcox]

Yes I have already learned about miller falls
by this list
unless the old one keep away
Thanks



----- Original Message ----- 
From: "Victor Hamburger" <VHamburg at bellatlantic.net>
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Sent: Monday, January 12, 2004 8:26 PM
Subject: Re: [Woodcarver] Tools


> To make a DONATION to the List using PayPal OR regular mail, click this
link: http://wwwoodcarver.com/WWWList/WWWList.html
> > Linehan718 at aol.com wrote:
> >
> > I suggest you get flex cuts for now then.  if you can find miller falls
> > tools  they are both better than buying cheap tools.    Maura
>
> I usually don't bad mouth companies, but Millers Falls used to be good
tools.
> They are now owned by Great Neck and are all made in the far east of
inferior
> materials.  If your budget is tight, (and I have been there!) then buy the
> Warren or the Flexcut.  Both are qualities tools that I use and respect.
My
> last Millers Falls tool that I have any faith in is an old block plane,
about 40
> years old!
>
> Best,  Vic H
>
>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver
>