[Woodcarver] web page

[Clive Goss]

Hello Cynda,
What program are you using to build it, I use Front Page 2000, and I use
frames to place the pictures and text in. ( a tip given to me by Greg
Wilkerson.) When adding a frame you can place it anywhere you want to and
then add the picture and text inside the frame. Also you want to size your
pictures no bigger than 100kb, I found by making the largest number 650
pixels they come out fine, i/e, if you open your picture in an editing
program, I use Corel Photo House, click on "Image Properties",and choose the
size in Pixels, and it is 2000X2500, make the 2500, to 650, check that
maintain aspect ratio is on to keep your resolution right,  I then use the
"optimize for the internet" feature and compress it to 10-20%. and it should
come in around 60 - 80 kb. I then save it to a folder on my desktop to be
added to my web page. Also when using frames you can either show the frame
border or turn it off. I like to show it, see my pictures at
www.partnersinwood.com.
If I can be of further help please contact me off list at
clive at ns.sympatico.ca
Take care and good luck,
Clive.


> Hi all,
> I am finally trying to build a web page. I'm told it is so easy with this
> program. Well, like flying is easy to a trained pilot!
> It is making progress but I am stuck on one thing. (well, this one,
> anyway.)  I can't get my pictures to go across the page, they want to stay
> in a left hand column. When I click to put them in the center or on the
> right, it is still a step down the page. Somebody please tell me how to
get
> them across in a row????  When adding a picture, it can only go to
> someplace marked "add here."  The Add here buttons don't come up where I
> need them. HEEEEEEELLLLLLLLPPPPPPPP!!!
>
> HEre it is for what it's worth. Still have a lot of pictures to process.
> www.woodneggs.tripod.com
>
> I also want to change the name to eggsnwood.  Sounds like my eggs are all
> made of wood.
>
> Cynda
>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver