[Woodcarver] White Birch

[Joe Dillett]

White birch is excellent for carving and woodworking. Our beloved List
owner, Bill Judt, uses it very often. It is hard but it takes the detail
well. For a hard wood it is quite stable. It is strong and durable and takes
any finish well.

Joe Dillett
The Carving Shop
645 E. LaSalle St. Suite 3
Somonauk, IL. 60552
(815) 498-9290 phone
(815) 498-9249 fax
http://www.thecarvingshop.com
jdillett at thecarvingshop.com
http://www.carvingmagazine.com Carving Magazine web site and Readers Forum
**************************************************

----- Original Message -----
From: "Mike & Patty Wilcox" <mllrynaz at millry.net>
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Sent: Tuesday, March 02, 2004 10:26 PM
Subject: [Woodcarver] White Birch





I obtained some pieces of white birch from vermont
is it use for carving or wood work?
To bad but what I got at this time was left on the ground
& the color isn't up to par.
but can get some better taken care of if it is good.






----------------------------------------------------------------------------
----


>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver