[Woodcarver] Woodcarving Whatzit?

[Mike Bloomquist]

Oh Boy Alex!... I though you were gonna nail it down there for a second... sooooo close ;-).

-Mike B.->

P.S.  I won't drag this out too long, but a clue might be in order...
  ----- Original Message ----- 
  From: Alex Bisso 
  To: [Woodcarver] 
  Sent: Thursday, March 04, 2004 10:56 AM
  Subject: Re: [Woodcarver] Woodcarving Whatzit?


  To make a DONATION to the List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  Now isn't this fun!  I have never seen such a contraption but have really enjoyed the comments.  With the large hand-wheel and apparently small gear that meshes with the vertcal toothed bar, it seems that a lot of downward pressure can be applied.  Also, the horizontal clamp and wormscrew can obviously hold a piece of wood solidly while accurately positioning it.  With these thoughts in mind, I initially liked the of it being used to make mortises that Rip put forth.  However, the end works/tool does not look suitable and it seems that holes would have bo be pre-drilled before pressing out the squared end mortise.  Also you would not need so much height/thickness for the size wood normally used with mortises so I have reservations about that.  It is unlikely that even with a lot of pressure one could shear thick wood across grain, I prefer Gene's idea of it being a slicer or let's say a verticle splitter to make shingles, etc..  It does look like it operates similar to a manual, verticle version of a log/firewood splitter and the horizontal adjust assure accurate thicknesses.  Although I do not see a direct link to carving I still favor this one.  Maybe sometimes the grain ridges are then carved off to make smooth shingles or shims.
  I also liked the humorous responses.  
  Thanks for the posting Mike - and do not keep us in suspense for too long.
  ALEX
    ----- Original Message ----- 
    From: Mike Bloomquist 
    To: [Woodcarver] 
    Sent: Wednesday, March 03, 2004 5:45 PM
    Subject: [Woodcarver] Woodcarving Whatzit?


    To make a DONATION to the List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html



----------------------------------------------------------------------------


    OK, this probably won't stump too many of you, but what carving related function does this tool perform?  Yes, it is woodcarving related ;-).

    http://www.borg.com/~bloomqum/images/whatzit1.jpg
    http://www.borg.com/~bloomqum/images/whatzit2.jpg

    I bartered a N.A. Flute for this beast at our MVAWA meeting last night (and Yvonne is having me evaluated today).

    Keep on Carvin'
    -Mike Bloomquist->

    Wooden Dreams Woodcarving
    http://www.borg.com/~bloomqum



----------------------------------------------------------------------------



    _______________________________________________
    Woodcarver mailing list
    Woodcarver at six.pairlist.net
    http://six.pairlist.net/mailman/listinfo/woodcarver


------------------------------------------------------------------------------



  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20040304/11642f50/attachment.htm