[Woodcarver] sanding pads

[TommieBStewart at cs.com]

In a message dated 5/13/2004 8:14:57 PM Central Daylight Time, 
woodcarver1 at ejourney.com writes: 
> 
>     If you go to your auto parts store and get a tailpipe coupler about 
> three inches long &grind A sharp edge on one end of it you can cut out rounds of 
> scotch brite pads to fit on A mandrel . You can get them in different 
> diameters to fit what you are doing. Gordon S 
> 
Thanks. I'll try this. In the mean while I was using the Foredom to rough out 
and bent over to turn off the motor and let the burr catch on a towel on my 
chair. Needless to say it twisted the cable. Dumb, dumb....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20040514/f8489a93/attachment.htm