[Woodcarver] Pneumatic question

[RAY MIGHELLS]

Hi Chris;  Harbor Freight is a good source for air driven rotary tools.  You
can buy the 1/4" arbor size that grinds at 22000rpm with about 90 lbs air
pressure for between $9 & $20.  The micro grinders turn at about 55000 rpm
and cost about $30.  You can work them pretty hard and lean on them pretty
hard.  My machinist cousin says they're practicaly indestructable.  They do
require a dependable air supply and they are a little on the noisey side.
Hope this helps,  and thanks again for the class at the GOW  Ray Mighells
6760 Rt 417 Killbuck NY 716 945 0098 Please view my work at:
http://www.picturetrail.com/razaxnstuff
----- Original Message ----- 
From: <chrishoward307 at bellsouth.net>
To: <woodcarver at six.pairlist.net>
Sent: Thursday, September 30, 2004 6:35 PM
Subject: [Woodcarver] Pneumatic question


> To make a DONATION to the Mailing List using PayPal OR regular mail, click
this link: http://wwwoodcarver.com/WWWList/WWWList.html
>
>   Does anyone have a pneumatic rotary carver or know anything about them
such as quality, control....etc I am thinking oif buying one but would like
to hear others comments first.
> Thanks Chris Howard
> gatlinburgartist.com
>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver