[Woodcarver] High Pressure Air (HPA)

[CTPops32 at aol.com]

In a message dated 2/9/2005 7:30:15 P.M. Central Standard Time,  
rhc511 at hotmail.com writes:

Does  anyone have any experience in piping HPA with PVC
& does the cement  hold at the connections?





Dick, I ran 1/2" PVC schedule 40 to three locations in my garage and  every 
thing held good.  Compressor was set to shut off at  125 psi.   Make sure you 
get the right cement and follow  directions.  Also used teflon tape on the 
quick connects for the hose  connections.  Only problem I had was after having 
used this setup for over  a year I decided to move the compressor and my main 
hose reel.   

Dick  McBride
Cypress, TX



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050209/8a520d8a/attachment.html