[Woodcarver] Re: Ball in Cage

[gjpat at cyberbeach.net]

Ooops forgot to mention that it was Bill Russell from this list who write 
the magazine article, gotta give credit where credit is due.(G)


Gordon Paterson
Dowling, Ont.Can.

At 01:00 PM 2/21/2005 -0500, you wrote:

>OOOOOHHHH Barney you are deep trouble now for telling the secret of how a 
>golf ball ends up in a carved cage.The Golfball Whizzards will cast a 
>spell on you and you will be forever doomed to carving golf ball cages 
>with too big of openings to hold the ball captive.(G)
>Try Carving Magazine issue 2.
>
>Gordon Paterson
>Dowling, Ont.Can.
>
>
>At 09:42 AM 2/21/2005 -0800, you wrote:
>
>>A while ago one of the magazines had a feature on carving a caracature 
>>bust with a golf ball in a cage in its base.  Does anyone know where that 
>>appeared and/or what dimensions and drill bit size were used?  As I 
>>recall, the cage was carved and the bars were soaked in water to make 
>>them supple enough to force the ball in. Any help would be appreciated.
>>
>>Barney Elking
>>Fortuna, CA
>>
>>_______________________________________________
>>Woodcarver mailing list
>>Woodcarver at six.pairlist.net
>>http://six.pairlist.net/mailman/listinfo/woodcarver
>_______________________________________________
>Woodcarver mailing list
>Woodcarver at six.pairlist.net
>http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050221/0a0cfa47/attachment.html