[Woodcarver] glue on face plates

[Lkdhvt at aol.com]

Question--
Hi All,
Just a short while ago someone was looking for those who do  turnings.
Now it's my turn to ask after I inadvertently hit the delete key on  all my
saved items.  :(    My question to the wood turners is,  do you glue a spacer
block to the wood that you are turning and screw your  faceplate to that
spacer?  If you do, what kind of glue are you using  for that?
Thanks.....

I have used a spacer block in the past.  I used regular  Elmers  wood glue.  
I have had good luck with this method as long as you remember  to be careful.  
You are relying on a glue joint which is weaker than the  wood.  So I would 
run at slower speeds and be careful not to catch a  tool.?  Good luck
   

Don H in  VT
http://www.woodcarversdepot.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050117/e3f37e05/attachment.html