[Woodcarver] Rolling tool cases, who makes them?

[Sylda]

Thanks, Jack, you went to a lot of trouble to measure everything and give us
such a good description.  That sounds good.  Thanks for the info.
Sylda

On 1/20/05 1:12 AM, "Jack Royer" <deuell at reinbeck.net> wrote:

> DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular
> mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html
> Hello all, I hope this helps Sylda and anyone else that is interested.  I
> have a rolling tool station as it is called. It is made by Plano my wife
> bought it for me a couple of years ago for Christmas. She bought it at
> Menards which is a large tool and lumber outlet. I like it I can carry a lot
> of things in it. overall dimensions on the outside are H= 32" D=11" W= 21"
> The top with hinged open opening like reg tool box is. Inside dimensions. L=
> 18"  W= 10 1/4" D= 3 1/2" with another 2" of space inside the lid when it
> closes down. There are three pull out drawers. They are approximately the
> same dimensions as the top with  various depts. There is a large bin with a
> pull out top and hinged at the bottom. It is, L=15 1/4" W= 11" D= 10" with
> about another  4" clearance at the top of the bin. It is a very safe way to
> carry tool rolls also. I hope this helps.someone.        Jack
> 
> 
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver
>