[Woodcarver] information

[Bill Smith]

hi charley if u would like to please write me off the
list and let me know what is doing and what u have
done 
also have u tried thinning the paints as I know some
times they are still thick, I have used the paints
made for the air brush and found problems with it.
Since we do not know how long the paint had been
sitting around it does start to dry out some, also
when u pour it into  your air brush cup how thick is
it.

Bill Smith



--- Joe Dillett <jdillett at thecarvingshop.com> wrote:

> DONATIONS to the Woodcarver Mailing List can be made
> using PayPal OR regular mail. Click this link:
> http://wwwoodcarver.com/WWWList/WWWList.html
> Hi Charley,
> 
> It's difficult to troubleshoot the problem your
> having with your airbrush
> from the discription you gave.
> 
> First I would try to thin the paint. Perhaps the
> viscosity is too high
> causing the blotching and spotting.
> 
> Next try different adjustments of the pattern. My
> double action Thayer &
> Chandler Model C adjusts by turning the tip in and
> out.
> 
> Next try adjusting the air pressure.
> 
> I hope this helps.
> 
> Joe Dillett
> The Carving Shop
> 645 E. LaSalle St. Suite 3
> Somonauk, IL. 60552
> (815) 498-9290 phone
> (815) 498-9249 fax
> http://www.thecarvingshop.com
> jdillett at thecarvingshop.com
> http://www.carvingmagazine.com Carving Magazine web
> site and Readers Forum
> http://community.webshots.com/user/joe_dillett
> http://www.citizenactions.org
> http://www.safeguardsystemsinc.com
> **************************************************
> 
> 
> ----- Original Message ----- 
> From: "Charley Green" <charlyg5 at comcast.net>
> To: "[Woodcarver]" <woodcarver at six.pairlist.net>
> Sent: Wednesday, January 26, 2005 5:05 AM
> Subject: [Woodcarver] information
> 
> 
> > DONATIONS to the Woodcarver Mailing List can be
> made using PayPal OR
> regular mail. Click this link:
> http://wwwoodcarver.com/WWWList/WWWList.html
> >
> 
> 
>
----------------------------------------------------------------------------
> ----
> 
> 
> Good Morningggg the list.
> I need some information on useing my 2 new toys for
> carving.
> I got a Badger  150 airbrush and compresser for
> Christmas and am trying to
> learn to use it. So far my little dots are big ones
> and my streight lines
> look like the we done with pinking shears.  I'm
> useing premixed paint and
> still have some problems with it clogging. I this
> the nature of the beast?
> Also I sold some small birds and bought myself a
> preasant a Ram micro carver
> with a 45,000 hand piece. what bits will work best
> with my new found speed..
> I did most of my carving with knives and gouges and
> a cheep dermel time to
> move to faster and better things. I don't have a web
> site so can't show you
> a picture of the Grezzle Bear you helped me with
> last spring. If I figger
> out how to make one one the new fangled compuke I
> wiill
> 
> thanks for all the help you've been in the past. Am
> looking to be active in
> the list and learn and maby pass on some of what
> I've learned. thanks again
> 
> 
> Charley
> 
> 
>
----------------------------------------------------------------------------
> ----
> 
> 
> > _______________________________________________
> > Woodcarver mailing list
> > Woodcarver at six.pairlist.net
> >
> http://six.pairlist.net/mailman/listinfo/woodcarver
> 
> 
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com