[Woodcarver] Re: Walking stick stand

[gjpat at cyberbeach.net]

Sure Dennis, stick a suction cup on the bottom since all you want to do is 
display it.(G)
But what ever you do don't use any of the products quoted in your message.(G)

Gordon Paterson
Dowling, Ont.Can.


At 06:56 PM 1/28/2005 -0500, you wrote:

>Hello Fellow carvers!!!
>    I am looking for suggestions on how best to display a walking stick 
> that I carved at a Lee valley Seminar about two years ago. I carved it 
> from a 1" maple dowel and it has a long spiral from Top to bottom with a 
> brass eagle head handle. I want to display it beside a wicker chair . If 
> I leave it leaned up against the chair my dog nocks it over with his 
> tail!!!! So I am looking for any creative ideas on what I can do to build 
> (carve ?) a stand for it. Any ideas?????
>
>                    Dennis
>
>----- Original Message ----- From: "Joe Dillett" <jdillett at thecarvingshop.com>
>To: "[Woodcarver]" <woodcarver at six.pairlist.net>
>Sent: Thursday, January 13, 2005 2:14 PM
>Subject: Re: [Woodcarver] Gluing
>
>
>>DONATIONS to the Woodcarver Mailing List can be made using PayPal OR 
>>regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html
>>Hi Larry,
>>
>>Elmer's Carpenter's Wood Glue, TruBond Wood Workers Glue, ProBond weather
>>resistant Wood Glue, or Tite Bond 2 are the products I generally use and
>>very satisified with providing I get the surfaces matched very well. Gorilla
>>Glue is better for spanding a wider glue joint if the two surfaces are not
>>perfectly matched. Tite Bond 2 and ProBond weather resistant Wood Glue are
>>better for higher humidity like outdoor applications.
>>
>>I haven't found any of the above glues to be hard on the chisels, but keep
>>in mind that I'm carving with a 28-degree angle at the cutting edge.
>>
>>Joe Dillett
>>The Carving Shop
>>645 E. LaSalle St. Suite 3
>>Somonauk, IL. 60552
>>(815) 498-9290 phone
>>(815) 498-9249 fax
>>http://www.thecarvingshop.com
>>jdillett at thecarvingshop.com
>>http://www.carvingmagazine.com Carving Magazine web site and Readers Forum
>>http://community.webshots.com/user/joe_dillett
>>http://www.citizenactions.org
>>**************************************************
>>
>>----- Original Message ----- From: "Larry Odegard" <larryodegard at yahoo.com>
>>To: "[Woodcarver]" <woodcarver at six.pairlist.net>
>>Sent: Thursday, January 13, 2005 10:20 AM
>>Subject: [Woodcarver] Gluing
>>
>>
>>>DONATIONS to the Woodcarver Mailing List can be made using PayPal OR
>>regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html
>>>OK, I know this has been discussed forever by people
>>>far smarter than I.  And if I had been smarter I would
>>>have retained what I read -- BUT, I didn't.
>>>
>>>Therefore,  would someone let me know what their
>>>favorite glue is for Basswood that will be carved
>>>through the glueline?  I am going to put together two
>>>pieces of 4" by 10" by 16" long stock, making a panel
>>>4" by 20" by 16".
>>>
>>>Thanks in advance for the replies.
>>>
>>>Larry