[Woodcarver] Vanity Plate

[Mike Bloomquist]

Oh Maura... I think you have LockTite confused with TiteBond <G>.  You're gonna need a compressor and an impact wrench!  Besides, I think you need one of your own... NYCCRVER, NYCCARVR, and NYCKARVR are all still available.  Just a thought.

Keep on Carvin'
-Mike B.->

Wooden Dreams Woodcarving
http://www.borg.com/~bloomqum
  ----- Original Message ----- 
  From: Linehan718 at aol.com 
  To: woodcarver at six.pairlist.net 
  Sent: Wednesday, May 04, 2005 10:28 PM
  Subject: Re: [Woodcarver] Vanity Plate


  DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  In a message dated 5/4/2005 6:43:13 P.M. Eastern Daylight Time, m.bloomquist at verizon.net writes:
    Maura,
    So, does that mean I need to coat the mounting screws with LockTite before the NEWR? <G>
  Yes Mike,  you probably should.  but since lock tite only works on wood, I will just bring a little old screwdriver with me.  Should be all I need.  Sleep Well.  See you in July.

  Maura carvin' in nyc
  http://www.carvinginNYC.com
  http://www.picturetrail.com/whiteknight718


------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050512/766e008a/attachment.html