[Woodcarver] Double beveled chisels..as recommended by Chris Pye

[WorkingInWood]

A  DRIFT!
  ----- Original Message ----- 
  From: Clive Goss 
  To: [Woodcarver] 
  Sent: Thursday, May 19, 2005 11:29 AM
  Subject: Re: [Woodcarver] Double beveled chisels..as recommended by Chris Pye


  DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  aaaaahaaa,
  Now what do you call a double bevel chisel with a secondary bevel on each side ????
  Clive


    ----- Original Message ----- 
    From: Linehan718 at aol.com 
    To: woodcarver at six.pairlist.net 
    Sent: Thursday, May 19, 2005 12:23 PM
    Subject: Re: [Woodcarver] Double beveled chisels..as recommended by Chris Pye


    DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



----------------------------------------------------------------------------


    In a message dated 5/19/2005 10:15:11 A.M. Eastern Daylight Time, carve at whillock.com writes:
      Some clarification of terminology might help in the discussion of double and secondary bevels.  

      In wood carving lingo a tool with a "double bevel" has a bevel on both sides of the tool, as with most caver's chisels.  A single beveled tool  has the bevel on one side of the tool, as with a carpernter's chisel--which gives it a self-jigging function (follows a straight wall along the unbeveled side).  And, of course,  most gouges are single beveled tools.

      A "secondary bevel" is the term used for the short bevel near the tip,  located  on  the same side of the tool  that is already beveled.  
    Interesting!  Sometimes I do sharpen it to the point where it has 2 bevels on the same side, but then I assume that I screwed up with the angle of bevel to stone and I work to remove that 2nd bevel until I am rid of it.  Perhaps I might try using it with the 2 bevels next time I "accidentally" do that.  Could you please elaborate on what the purpose of that second bevel is.  Thanks

    Maura carvin' in nyc
    http://www.carvinginNYC.com
    http://www.picturetrail.com/whiteknight718


----------------------------------------------------------------------------


    _______________________________________________
    Woodcarver mailing list
    Woodcarver at six.pairlist.net
    http://six.pairlist.net/mailman/listinfo/woodcarver


------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050519/7cb04fec/attachment.html