[Woodcarver] relief panel carving

[Barney Elking]

I attach basswood relief carvings to hardwood plywood panels with no
difficulty.  The only difference is that I secure the carvings with epoxy
and small screws and you won't be able to use the screws.  I would think
that if you use one of the longer set epoxies and get good adhesion, you
should be in good shape.
Barney Elking
Fortuna, CA

----- Original Message -----
From: <stephenhatfield at bellsouth.net>
To: <woodcarver at six.pairlist.net>
Sent: Tuesday, November 01, 2005 3:16 PM
Subject: [Woodcarver] relief panel carving



> DONATIONS to the Woodcarver Mailing List can be made using PayPal OR

regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html

> Is it possible to carve relief work out of a softer wood such as basswood

and then attach it to door panels made of a harder wood?  Are there any
special considerations (other than the soft wood on a door issue)

>

> Steve

>

> _______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver