[Woodcarver] relief panel carving

[John Anderson]

Hi Steve,

The panels used in our church doors project are relief carved into laminated 
butternut. They are mounted (framed) into the doors with harder mahogony, 
using a spacer made from Butternut to compensate for expansion, etc.

Pictures of the panels and doors are located in the Picturetrail link below.

 John Anderson - Bristol, RI
Pictures of my woodcarvings can be found at:
http://www.picturetrail.com/john87
----- Original Message ----- 
From: <stephenhatfield at bellsouth.net>
To: <woodcarver at six.pairlist.net>
Sent: Tuesday, November 01, 2005 6:16 PM
Subject: [Woodcarver] relief panel carving



> DONATIONS to the Woodcarver Mailing List can be made using PayPal OR 

> regular mail. Click this link: 

> http://wwwoodcarver.com/WWWList/WWWList.html

> Is it possible to carve relief work out of a softer wood such as basswood 

> and then attach it to door panels made of a harder wood?  Are there any 

> special considerations (other than the soft wood on a door issue)

>

> Steve

>

> _______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver