[Woodcarver] Re: oxidizing of cherry wood

[Ivan Whillock]

I don't recommend blowing away the chips...always use a brush.  The constant blowing drives the guy next to you up a wall! (LOL)   Rip 


Hey, I'm not talking about steam engine sounds here.  A little puff of breath will move a chip out of the way and you can keep right on carving (and saliva stains the wood less than body oils(Small grin)!!  A brush is better to use than the hands, but you have to stop carving to use the brush, and, of course,  the swish-swish drives the guy next to you up the wall! ( big grin)
  ----- Original Message ----- 
  From: WdcvrRip at aol.com 
  To: woodcarver at six.pairlist.net 
  Sent: Thursday, September 08, 2005 8:10 PM
  Subject: Re: [Woodcarver] Re: oxidizing of cherry wood


  DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------



  In a message dated 9/8/05 12:40:32 PM, carve at whillock.com writes:



    (As an aside, a good hint for all carvers is to remove chips by blowing them away or using a brush,



  I don't recommend blowing away the chips...always use a brush.  The constant blowing drives the guy next to you up a wall! (LOL)   Rip 


------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050909/86a91a0b/attachment.html