[Woodcarver] June 2006 Fine Woodworking magazine article of interest

[Mike Bloomquist]

Thanks Vic.  I don't check that magazine very often, and probably would
have missed it.

Keep on Carvin'
-Mike B.->

-----Original Message-----
From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of Victor
Hamburger
Sent: Saturday, April 15, 2006 9:52 AM
To: Woodcarver
Subject: [Woodcarver] June 2006 Fine Woodworking magazine article of
interest

DONATIONS to the Woodcarver Mailing List can be made using PayPal OR
regular mail. Click this link:
http://wwwoodcarver.com/WWWList/WWWList.html
The June issue of Fine Woodworking has arrived and it has an article
some may be 
interested in.  It features a carving hold-down that has several neat
features 
so it can hold relief carvings, thicker carvings like corbels, as well
as 
holding molding for carving.  It is on page 76 of the magazine.

Also featured in the issue is an article on building mantels, sharpening
chisels 
(flat) with abrasive paper, and a bit about clear water-based finishes.

If you can't find or afford the magazine on the newstand, check larger
libraries 
for the issue.  You can preview the article here: 
http://www.taunton.com/finewoodworking/pages/fw_184_076.asp

enjoy!	Vic H


_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver