[Woodcarver] resin

Mike Walters mwalters69 at shaw.ca
Thu Aug 17 13:20:14 EDT 2006

Pat

I heard of a product called "Nu-Lustre 55" that can be used to cover bar tops, tables, etc. It leaves a hard transparent surface. I found it while looking for something to fill in a relief carving on a table top that I still wanted to use as a table.

While looking into it further, the most common FAQ was about it running, looking rough & not setting up properly. The answer the manufacturer always gave to these questions was that it wasn't mixed enough.

Mike 'TheKid'

----- Original Message -----
From: Pat Lee <plee at oasisol.com>
Date: Thursday, August 17, 2006 9:08 am
Subject: Re: [Woodcarver] resin


> DONATIONS to the Woodcarver Mailing List can be made using PayPal

> OR regular mail. Click this link:

> http://wwwoodcarver.com/WWWList/WWWList.html

>

>

Content-Type: multipart/alternative;
boundary="----=_NextPart_000_013D_01C6C1D4.4BB5A1E0"


------=_NextPart_000_013D_01C6C1D4.4BB5A1E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I am sorry, sometime i tend to ramble, that is what happens when the =
oxygen gets low. I have a relief carving and i poured the two part =
resin on it and ended up with low spots and some rough spots that didn't =
get covered with the resin. you can see through it, is that =
transparent? the piece is only about 1/4 inch in depth at the lowest =
spot. thanks for your help
pat
------=_NextPart_000_013D_01C6C1D4.4BB5A1E0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2873" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Arial Black" size=3D4>I am sorry, sometime i tend to =
ramble, that=20
is what happens when the oxygen gets low.&nbsp; I have a relief carving =
and i=20
poured the two part resin on it and ended up with low spots and some =
rough spots=20
that didn't get covered with the resin.&nbsp; you can see through it, is =
that=20
transparent?&nbsp; the piece is only about 1/4 inch in depth at the =
lowest=20
spot.&nbsp; thanks for your help</FONT></DIV>
<DIV><FONT face=3D"Arial Black" size=3D4>pat</FONT></DIV></BODY></HTML>

------=_NextPart_000_013D_01C6C1D4.4BB5A1E0--
-------------- next part --------------
_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver

More information about the Woodcarver mailing list