[Woodcarver] resin

[Oregonkarver at aol.com]

Watch the temperature of the room where you are pouring the Envirotex  resin. 
 To cold or hot and you will have problems, check the label.   The other 
thing I do when using it is I have a large pastic tub that I use only  when 
pouring resin, I place the tub upside down over the project after pouring  to keep 
all dust away. I store the tub in a large plastic bag when not  in use to keep 
dust away, (yes I have used the resin a lot to make  clocks).   I pick it up 
every several minutes very carefully to check  for bubble and then replace 
after I take care of bubble.  It takes very  little dust to ruin a beautiful clock 
or other project.  I have several  clocks to prove this fact.
 
Arthur
Carving in Oregon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20060818/12509640/attachment.html