[Woodcarver] Foredom

[PinocchioCarver at aol.com]

Hello Jim, Either bad ball bearings or need shaft  grease. Don't bend the 
shaft radius between the hand piece  and the  shaft and sheath too tight, that 
would create the frictions inside the  shaft and sheath. Here the links, you 
want to look for tips, information and  operating instructions. Good lucks
 
Mike G.
 
_http://www.blackstoneind.com/foundations/store/home.asp_ 
(http://www.blackstoneind.com/foundations/store/home.asp)  =  home page,
 
_http://www.blackstoneind.com/foundations/store/storepage.asp?page=FAQs_ 
(http://www.blackstoneind.com/foundations/store/storepage.asp?page=FAQs)    = 
shaft repairs and info
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20061206/39cf24d8/attachment.htm