[Woodcarver] Complete bear mask photos posted

[Loren Woodard]

Alex:

 

Have you tried Bri Wax.  It is a past wax.  If you haven't tried it you
might want to give it a shot.  For brown I would suggest the light brown as
the dark brown is nearly black. 

 

Loren Woodard

 

 

  _____  

From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of Alex Bisso
Sent: Sunday, March 12, 2006 6:58 PM
To: [Woodcarver]
Subject: [Woodcarver] Complete bear mask photos posted

 

I just posted some photos of my finished bear mask carving on my
picturetrail "Carvings" album.  The first photo include a discription of the
painting and finish that was used.  If you care to see it, the link to my
albums site is":

http://www.picturetrail.com/gallery/view?username=abisso
<http://www.picturetrail.com/gallery/view?username=abisso&x=15&y=10>
&x=15&y=10

 

I have been using the Watco finishing wax with good results but I am not
please with the fact that it is so liquid (must contain a solvent) and does
not dry in a reasonable amount of time.  Even a very thin, wiped down coat
takes quite a while to dry to the point where it can be buffed (much longer
than it says on the can to allow).  If any one else is using a different
finishing wax or has experience with several of them and has a preference, I
would like to know of some recommended options to to the Watco.

 

ALEX 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20060314/568062f7/attachment.html