[Woodcarver] Cupping

[Peter Barrow]

On 9 Mar 2007, at 20:25, Peter Barrow wrote:


> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

> WWWList.html

> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

> Submit photos to our List Photo Gallery: http:// 

> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>

>

> On 8 Mar 2007, at 20:31, Linehan718 at aol.com wrote:

>

>> Support our List with a donation: http://wwwoodcarver.com/WWWList/ 

>> WWWList.html

>> Visit our List Photo Gallery at: http://woodcarver.smugmug.com/

>> Submit photos to our List Photo Gallery: http:// 

>> www.wwwoodcarver.com/Smugmug/SmugmugGallery.html

>>

>> In a message dated 3/8/2007 2:55:39 PM Eastern Standard Time,  

>> mwalters69 at shaw.ca writes:

>> I'm wondering what can be done to lessen the cupping in a relief  

>> carving.

>> Do not carve more than halfway into the wood.  you can also remove  

>> some of the thickness from the backside.  Together this should  

>> help minimize any cupping.

>>

>> Maura carvin' in nyc

>> www.CarvinginNYC.com

>> http://www.picturetrail.com/carvinginnyc

>>

>>

>>

>>

>>

>> AOL now offers free email to everyone. Find out more about what's  

>> free from AOL at AOL.com.

>> _______________________________________________

>> Woodcarver mailing list

>> Woodcarver at six.pairlist.net

>> http://six.pairlist.net/mailman/listinfo/woodcarver

>

> _______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20070309/2c32ee19/attachment-0001.html