[Woodcarver] Bandsaw blades

[WdcvrRip@comcast.net]

Jeff, I had a 12-inch Sears bandsaw and now have a 14-inch Delta.  On both saws i used (use) a 1/8th-inch skip tooth blade for all my cutnouts, basswood, butternut, ash, birch, oak, etc.   Cuts smoothly and turns sharp corners on stock up to 6-inches.   Rip

 -------------- Original message ----------------------
From: "Jeff Pretz" <jefpretz at ptd.net>

> Gentle Subscribers :-) Please support our List with a donation: 

> http://wwwoodcarver.com/WWWList/WWWList.html

> 



-------------- next part --------------
An embedded message was scrubbed...
From: "Jeff Pretz" <jefpretz at ptd.net>
Subject: [Woodcarver] Bandsaw blades
Date: Sat, 12 Jul 2008 02:40:14 +0000
Size: 2192
Url: <http://six.pairlist.net/pipermail/woodcarver/attachments/20080713/3a0c19c1/attachment.mht>