[Woodcarver] chain carver

[Oregonkarver at aol.com]

I use one along with a small electric chain saw for my large  carvings.  I 
do a lot of wood spirits using the king Arthur tool.   Read the instructions 
very carefully and make sure you have a good grinder for  it to go on.  I 
learned to always move the tool from left to right, going  against the 
movement of the grinding wheel.  Not following the instructions  can be very bad.  
The following forum can be of some help:
 
_http://www.woodcarvingillustrated.com/forum/f68/_ 
(http://www.woodcarvingillustrated.com/forum/f68/) 
 
Arthur
Carving in Oregon
oregonkarver at aol.com
 
 
In a message dated 12/27/2009 7:14:27 A.M. Pacific Standard Time,  
shadow061 at yahoo.com writes:

Friends  in Carving: Please support our List - visit  
carverscompanion.com/List/Support.html to donate.






               
 
was wondering if anyone has used one of these chain  carvers that fits onto 
a grinder ?  I got one for  Christmas and have never used one of these 
things.  It  fits on a 4" grinder.  Any help or info is greatly  appreciated..  
John in Az







_______________________________________________
Woodcarver  mailing  list
Woodcarver at carverscompanion.com
http://six.pairlist.net/mailman/listinfo/woodcarver

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20091227/08323835/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 11090 bytes
Desc: not available
Url : <http://six.pairlist.net/pipermail/woodcarver/attachments/20091227/08323835/attachment.jpe>