[Woodcarver] Help-web page not displaying correctly

[Matt Kelley]

Hi Maura -

So, looking at the source code,  it looks like you build this page  
with MS FrontPage, right?

It is my experience that some MS products for building web pages play  
well only with Internet Exploder.  IE is not open web standards  
compliant, and it may be that some MS web building tools are also not  
open standards compliant.   I've occasionally had some problems with  
code that played well with several web compliant browsers but had  
problems displaying correctly on IE.

There does appear to be some small differences between the code for  
the last visible photo and the next.  I'm not a good enough hand coder  
to figure out the problem with a quick look, unfortunately.  It's  
possible that Front Page burped at the wrong moment when you were  
building the web page, and that might be the cause (and it might be  
something else entirely).  Rebuilding from the last visible photo  
might fix the problem . . .

Matt
***********************************************
Matt Kelley: Woodcarver, E-zine Editor, W3E Coordinator

Woodcarver Online Magazine, W3Exchange Programs,
Carver Resource Files at:   http://carverscompanion.com
Carving Shirts & Gear at:  http://carverscompanion.com/cclogostuff/logostuff.html
CelticCarver WoodWorks: http://celtcarver.com




On Jul 10, 2009, at 1:52 PM, Linehan718 at aol.com wrote:


> In a message dated 7/10/2009 10:14:01 A.M. Eastern Daylight Time, bremmers at midwestinfo.com 

>  writes:

> Maura

>

> Just went and checked your site with Internet Explorer and all the  

> pictures come up fine.  They do not when I use Firefox.  There must  

> be a conflict there between using the different browsers.   I guess  

> that is where I would check.....

>

> Good luck

>

> Gene

> Thanks Gene, at least I know its nothing I'm doing.

>

> Maura