[Woodcarver] H Even at this unnatural hour ...

[Chris Howard]

       Joe,
      For myself any of the jewelers compounds are  great for polishing metal, what I know from experience in sand blasting aluminum oxide is what I have used to etch glass. I have always said its hard to beat a man at what he makes a living at so the white compound John Dunkle uses and Yellow Stone are close his Dad I believe came up with the Yellow Stone and they both work well. As far as carving I am working on Wood Spirits and 1/2 log wall hanging for shops here in town and E-bay been doing 2 Wood Spirits a day or 1 Native, doing the small ones are good practice been trying to refine women's features some.
Chris Howard   
  ----- Original Message ----- 
  From: Joe Dillett 
  To: [Woodcarver] 
  Sent: Thursday, March 12, 2009 10:14 AM
  Subject: Re: [Woodcarver] H Even at this unnatural hour ...


  Friends in Carving: Please support our List - visit the Carvers' Campanion Shop at http://cafepress.com/woodcarving





------------------------------------------------------------------------------


  Maura, I wish you luck on the move. An adequate size shop is important.

  Here's my opinion to your question, "what is the best compound to use on a leather strop?"
  I prefer the green compound. At one of our GOW's we tested the green against the Yellow Stone. We tried to control the variables as much as possible following the directions on both. In the end we all decided that there wasn't any difference, both yielded good results. I believe both are 1/2 micron particles of aluminum oxide for the abrasive with different binders. 1/2 micron is not quite optical quality because if used on glass it does cloud. In the buffing section of most hardware stores you can get sticks of buffing compound for Plexiglas and glass that is about 1/4 micron, which appears to be optical quality because it will not cloud glass. I feel that the 1/4 micron would produce a finer edge on our carving tools but would not be worth taking almost twice the time for polishing where the 1/2 micron does a good enough job, on our tools, for even the softest of woods. I have tried the powdered aluminum oxide (jewelers quality 1/4 micron) with success as well as the larger sticks of the cheaper white compound, and the compounds found in the buffing section at most hardware stores and prefer the green compound over all of those. My preference is based on ease of use (just rub it on), how it holds to the leather or any other substrate, overall cost (one stick lasts a very long time) and especially how quickly it polishes.

  I've never heard of using baby powder for buffing (just babies in the buff) but I have heard of toothpaste as a substitute for buffing compound. My feelings on that is I would rather take advantage of all the testing those companies did, experimenting with hundreds of materials to engineer a high quality product. 

  Joe Dillett
  The Carving Shop
  645 E. LaSalle St. Suite 3
  Somonauk, IL. 60552

  (815) 498-9290 phone
  (815) 498-9249 fax
  http://www.thecarvingshop.net [business web site]
  http://www.carvingmagazine.com ['Ask Joe' column]
  http://community.webshots.com/user/joe_dillett
  ******************************************************************
    ----- Original Message ----- 
    From: Linehan718 at aol.com 
    To: woodcarver at carverscompanion.com 
    Sent: Thursday, March 12, 2009 4:36 AM
    Subject: Spam:****, Re: [Woodcarver] Even at this unnatural hour ...


    Friends in Carving: Please support our List - visit the Carvers' Campanion Shop at http://cafepress.com/woodcarving





----------------------------------------------------------------------------


    In a message dated 3/12/2009 5:31:04 A.M. Eastern Daylight Time, celtcarver at me.com writes:
      In any event, even if I can't type, I can hear the faint sounds of  
      tools being sharpened. What are you working on? What is the burning  
      woodcarving question of the day on the cold, blustery morn?


      Matt Kelley

    I am as always carving more mini wolves (3/4" tall) , have done about 200 at this point, people keep buying and I will keep carving.

    My question of the day will be "what is the best compound to use on a leather strop" Is it aluminum oxide???  I have heard baby powder is excellent.  Does anybody have any knowledge of that???   

    Maura
    www.Carvinginnyc.com




----------------------------------------------------------------------------
    Worried about job security? Check out the 5 safest jobs in a recession.


----------------------------------------------------------------------------


    _______________________________________________
    Woodcarver mailing list
    Woodcarver at carverscompanion.com
    http://six.pairlist.net/mailman/listinfo/woodcarver


------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at carverscompanion.com
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/woodcarver/attachments/20090312/e70a9df7/attachment.html>