[Woodcarver] using colored pencils on woodcarvings

[Earl and Barb]

I'm glad to see this discussion. I've tried colored pencils and really
liked the look but was frustrated with the way they go on. I'll try the
thinner or Liquin.

On Thu, Jan 15, 2015 at 11:55 AM, Donna Menke via Woodcarver <
woodcarver at carverscompanion.com> wrote:

> Jim, I have used oil pencils to color wood burnings and they worked very
> well. They are softer than regular colored pencils, although good quality
> artist-grade colored pencils are OK.
> You want the tooth of the wood to grab the pencil color, and bare sanded
> wood works very well. So I would seal afterwards.
> Staining first would pose no problems at all. Just keep it light enough so
> that the pencil will show up.
> Finishing with poly for oil pencil is a problem since the poly will
> dissolve and smear the colors. I fixed this by sealing the design first
> with the poly and then waiting until it was dry before finishing the whole
> thing.
> I cannot attach a photo here, bit it is part of a blog on making a harp
> (Making the Rainbow Harp) on my web site.
> Donna Menke
> See my web site:
> woodworks-by-donna
>
> Donna Menke
> See my web site:
> woodworks-by-donna
>
>   ------------------------------
>  *From:* Joe Dillett <jdillett at thecarvingshop.net>
> *To:* [Woodcarver] <woodcarver at carverscompanion.com>
> *Sent:* Thursday, January 15, 2015 8:22 AM
> *Subject:* Re: [Woodcarver] using colored pencils on woodcarvings
>
>  Hey Jim,
>
> The answer to your question is to test on samples. There are three basic
> types of colored pencils, wax, oil and watercolor. Each will react
> differently. Most papers has enough tooth to get an even color
> distribution, however wood is quite different and difficult to get an even
> coat. Even watercolor pencil, which absorbs even on paper does not on wood.
> I have tried several different methods of using color pencils for adding a
> little hint of color but was never satisfied with the results. Maybe some
> others here have found a technique to achieve good results?
>
> Joe Dillett KC9VAU
> The Carving Shop
> 645 E. LaSalle St. Suite 3
> Somonauk, IL. 60552
>
> 815-498-9290 phone
> 815-498-9249 fax
> http://www.thecarvingshop.net Web Site
> http://thecarvingshop.shutterfly.com Instructional videos and pictures
> jdillett at thecarvingshop.net email
>
>
>
> *From:* Jim Williams <wdcrvr at hotmail.com>
> *Sent:* Wednesday, January 14, 2015 4:04 PM
> *To:* Carvers List <woodcarver at carverscompanion.com>
> *Subject:* [Woodcarver] using colored pencils on woodcarvings
>
>  I want to try using colored pencils to put subtle colors on a
> woodcarving.  Does anyone out there have any experience with this method?
> Do I seal the wood first or seal after I use the pencils?  If I want a
> stain for the majority of the carving can I apply a light stain and then
> use colored pencil for the highlights and then seal the whole thing with a
> poly finish?  All information or suggestions are welcome.
>
> Thanks
> Jim
>
>
>


-- 
Barb & Earl Eyre
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/woodcarver/attachments/20150115/3c128078/attachment-0001.html>