[DesignII] Transfer results to Excel

[Lynn McGuire]

Hi Phil,

What parts of the feed flash for the Refine Column did you want
to see ?  Any specific part: Vapor Portion of Feed, Liquid Portion 
of Feed, Laboratory Distillation, or the K-Values for Feed Flash ?

Do you have more than one feed stream to the column very often ?

Thanks,
Lynn McGuire

----- Original Message ----- 
From: "Lynn McGuire" <winsim at winsim.com>
To: <designii at winsim.com>
Sent: Friday, June 07, 2002 6:37 PM
Subject: Re: [DesignII] Transfer results to Excel


> Hi Phil,
> 
> Didnt think that anyone wanted the Column feed flash results sent 
> to Excel.  We will add that to all the columns. 
> 
> Will also check to see why the Refine column pumparound heating / 
> cooling curves are not sent to Excel. 
> 
> Thanks,
> Lynn McGuire
> 
> ----- Original Message ----- 
> From: "Philip Keown" <pkeown at yahoo.com>
> To: <designii at winsim.com>
> Sent: Friday, June 07, 2002 2:42 PM
> Subject: RE: [DesignII] Transfer results to Excel
> 
> 
> > Some of the Refine results appear to be only available in the output file.
> > It would be useful to have the option to include them in the excel file.
> > Specifically feed temperature and pressure at the conditions in the column
> > at the feed entry point (mainly flash zone temperature), and heating/cooling
> > curves for pump around streams.
> > 
> > Keep up the great work.
> > 
> > Regards
> > 
> > Phil Keown
> > 
> >  -----Original Message-----
> > From: designii-admin at winsim.com [mailto:designii-admin at winsim.com]  On
> > Behalf Of Lynn McGuire
> > Sent: Thursday, June 06, 2002 12:03 PM
> > To: designii at winsim.com
> > Subject: [DesignII] Transfer results to Excel
> > 
> > We are in the middle of adding a configuration interface to our
> > Excel Blaster, the tool for transferring the results of your simulation
> > to MS Excel.
> > 
> > The configuration tool will allow you to significantly change the
> > data put on the stream summary page.  We are also adding
> > dimensional units conversion and specification of the row label.
> > 
> > Does anyone have anything in particular that you are interested in
> > for the Excel Blaster ?
> > 
> > Thanks,
> > Lynn McGuire
> > President
> > WinSim Inc.
> > 
> > 
> > 
> > 
> > _______________________________________________
> > DesignII mailing list
> > DesignII at winsim.com
> > http://www.pairlist.net/mailman/listinfo/designii
> > 
> > 
> > _______________________________________________
> > DesignII mailing list
> > DesignII at winsim.com
> > http://www.pairlist.net/mailman/listinfo/designii
> > 
> 
> 
> 
> _______________________________________________
> DesignII mailing list
> DesignII at winsim.com
> http://www.pairlist.net/mailman/listinfo/designii
>