Abingdon Branch

[NW Mailing List]

 Joe,

I too own one of the urethane M's.? I was never happy with the way it ran.? I am in the process of building a new frame and driver set with Baker valve gear.? I am fairly new to scratch building but would be happy to share my experience with you and see if it would be Oscale Mag worthy.

You can contact me off list at
TLpost at aol.com

Tom Lewis, Jacksonville FL.


 


 

-----Original Message-----
From: NW Mailing List <nw-mailing-list at nwhs.org>
To: nw-mailing-list at nwhs.org
Sent: Mon, 26 Jan 2009 12:27 pm
Subject: Re: Abingdon Branch









To Ed King,?

Thanks so much for the additional info about White Top and Creek Jnct. I don't know how I got Cedar Bluff mixed up with the rest of the towns on the line. Perhaps I'll name that connector Alavarado.?
?

You asked where I'm getting my Ms. I have three at the moment, two small Ms and one M2c, all custom built. One of them was made with a urethane resin boiler. I'm investigating having that cast in brass.?
?

I also have G1 #6 which is a converted 2-rail MTH PRR H3.?
?

If you are interested you can see them here:?
?

The M w/long tender?

http://www.oscalemag.com/!models/m1.jpg?
?

The M2?

http://www.oscalemag.com/!models/m2.jpg?
?

The resin M w/short tender?

http://www.oscalemag.com/!models/m444.jpg?
?

The G1 #6?

http://www.oscalemag.com/!models/g1fin_02a.jpg?
?

Best regards?

Joe Giannovario?

________________________________________?

NW-Mailing-List at nwhs.org?

To change your subscription go to?

http://list.nwhs.org/mailman/options/nw-mailing-list?

Browse the NW-Mailing-List archives at?

http://list.nwhs.org/pipermail/nw-mailing-list/?



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20090128/5996d33b/attachment.htm>