DCC CV's - Best Practices for N&W Steam

[NW Mailing List]

Dave,
This is a huge undertaking but I question your top speed for the K class. Maybe the K-3 would be 35 but that's very low for the K-1 and K-2 classes.
Just my thoughts and observations.
Roger HuberDeer Creek Locomotive Works 

    On Tuesday, January 14, 2025 at 12:27:54 PM CST, NW Mailing List <nw-mailing-list at nwhs.org> wrote:  
 
  Steam Modelers;It’s been a long time since I’ve seen any messages from the NW-Modeling-List leaving me to wonder if it has fallen into disuse. So, I’ll post here on the NW-Mailing-List. I am initiating the task of programming the CV’s of a small number of N&W Steamers in classes A, J, K, S1, Y3, & Y6b and many questions are coming to mind. So, why not tap into the best data source for guidance? As you share information, please indicate the Locomotive Class. Beginning with some foundational matters: My goal is to keep things reasonably realistic. For example; The Y classes were not speed-demons, and the K classes had operational speed limits due to counterbalance issues. When dealing with acceleration and deceleration rates – I’m rather torn about actually putting hard values in CV’s because I would say they should be dependent on external conditions such as train power and weight, in addition to terrain. Have you pursued speed limitations? Initial research suggested these top speeds for Road Power:               Class A – 70 mph              Class J – 110 mph              Class K – 35 mph              Class Y – 50 mph What are you using for:              CV 02 – Start Voltage              CV 03 – Acceleration Rate              CV 04 - Deceleration Rate              CV 05 – High Voltage (Speed Limiting)              CV 06 – Mid Voltage              CV 65 – Kick Start Speed Curves:              Which are you using?                           3-point curve? (Start, Mid, High of a preloaded curve)                                         CV 25 - Speed Table Selection?   Which one?                           14 step or 28 step configured?                                          What do you have for CV 67 to CV 94?                           Are you using a Throttle Control Mode?  If so, which one? Speed Matching & Consisting:              If it is Speed Matched, to what locomotive?What values do you use for:                           CV 66 – Forward Trim                           CV 95 – Reverse TrimWhat values do you use for consisting with other Locomotives:                            CV 21 – Consist Functions Fn1 to Fn8                            CV 22 – Consist Functions Fn0 & Fn9 to Fn12                            CV 23 – Consist Acceleration Rate                            CV 24 - Consist Deceleration Rate Thank you,Dave WillisBlt 1962, CN 4
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20250114/082fb6a2/attachment-0001.htm>