[Woodcarver] Re: Log carving.

[Merrilee Johnson]

Hi Greg!
  After looking at your shop again - I am still am amazed at how good it is 
layed out.  Looking at the face making jig I have a question.  And I'm sure 
it is not real inte;;egent but why is it so long?  I think I see several 
planes - layers of wood below the face   - isthat just a "holding spot for 
the wood you are carving on or just holding additional wood?  My "shop" in 
my basement is far from here!  Someday...
Merrilee


>From: "Greg Wilkerson" <greg at wilkersonwoodcarving.com>
>Reply-To: "[Woodcarver]" <woodcarver at six.pairlist.net>
>To: "'[Woodcarver]'" <woodcarver at six.pairlist.net>
>Subject: RE: [Woodcarver] Re: Log carving.
>Date: Wed, 21 Apr 2004 21:27:56 -0500
>
>To make a DONATION to the List using PayPal OR regular mail, click this 
>link: http://wwwoodcarver.com/WWWList/WWWList.html
>Hi Clive,
>In addition to the Easley Vise, which I use on mostly smaller carvings, I
>have a homemade face carving jig that I use all the time. You can see
>several pictures of it along with the rest of my shop at:
>http://www.wilkersonwoodcarving.com/myshop.htm . The most expensive part of
>this jig is the large screw at the top with the handle. I think that a
>couple of people have made one from just looking at mine. I don't have any
>plans to provide for, I didn't make mine, I don't even know who did. I got
>in a trade with a fellow woodcarver here in Branson about 8 years ago. But
>the basic concept would probably not be too hard to adapt to your own 
>needs,
>nor too expensive. I think "Big Dog" sells the types of screws you would
>need.
>
>Greg
>
>Greg Wilkerson
>Visit my website at:
>http://www.wilkersonwoodcarving.com
>-----Original Message-----
>From: woodcarver-bounces at six.pairlist.net
>[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of Clive Goss
>Sent: Wednesday, April 21, 2004 11:41 AM
>To: [Woodcarver]
>Subject: [Woodcarver] Re: Log carving.
>
>To make a DONATION to the List using PayPal OR regular mail, click this
>link: http://wwwoodcarver.com/WWWList/WWWList.html
>Hi all,
>I just took a course in carving a face in a log, and now I am trying to 
>come
>up with ideas on how to make a jig to hold the log while carving. I know
>Greg has the Easley carving vice, but it is a bit out of my price range at
>the moment. So any ideas would be very gratefully received.
>Thanks and take care,
>Clive.
>
>
>
>_______________________________________________
>Woodcarver mailing list
>Woodcarver at six.pairlist.net
>http://six.pairlist.net/mailman/listinfo/woodcarver
>
>
>_______________________________________________
>Woodcarver mailing list
>Woodcarver at six.pairlist.net
>http://six.pairlist.net/mailman/listinfo/woodcarver

_________________________________________________________________
Watch LIVE baseball games on your computer with MLB.TV, included with MSN 
Premium! 
http://join.msn.com/?page=features/mlb&pgmarket=en-us/go/onm00200439ave/direct/01/