[Woodcarver] Teaching Children to Carve?

Fri Dec 10 09:11:02 EST 2004

Susan
It has been my experience that children under the age of 11or 12 typically lack the hand control for knives (of course there are exceptions).  I have used soap to teaching and we use clay tools or make our own tool from tongue depressors or popsickle sticks. 
Words of Caution when using soap - lots of paper done on the floor to capture the pieces that get dropped. (This is ususally not a problem with one or two children, but a group, anything goes:)  Make sure you have warm washclothes around to wipe the soap out of the child's eye since they will touch their eyes while they carve.  Simple stylistic shapes works best.  If you go to www.ivory.com and look under entertainment, you will find an article about soap carving.
I don't have the list at home, but if you enter "Soap Carving" in google, you will find that the school system in Michigan has lesson plans available to download.

I have recently obtained some carvable foam from Big Dog to use with the kids.  It works with tools, but a microplane or rasps works better.

Good Luck and have fun
Lynn

Classic Carving Patterns <irish at carvingpatterns.com> wrote:
To make a DONATION to the Mailing List using PayPal OR regular mail, click this link: http://wwwoodcarver.com/WWWList/WWWList.html

Good Morning Everyone!

I had an interesting question in the e-mails this morning concerning a
young person (8 years old) wanting to learn wood carving. Now I have
never taught children! So I thought I would post both the question and
my reply for feedback from those of you on the digest that do teach
kids. Any ideas or suggestions would be fantastic. If you know of any
WebPages that focus on young carvers, tools sets for young carvers,
books or instructions for young carvers, safety issues (for any carver
at any age) ... would you please share them with us.

Oh ... Please, this question is about an inexpensive holiday gift that
probably will end up is some shoe box or kitchen drawer in a few weeks
... At least that is what would happen with my son at that age ... So
let's not get into $50 tools sets versus $50 individual tools - you
should always buy the best - sort of thing :) The focus of my question
to you is Teaching Children to Carve.

Thanks, Susan Irish

--- The Question ---

Wow! There is just so much information on carving! I am a mother of an
8 yr. old who is interested in beginning carving. I was hoping you
could answer a few of my question? What is a good age to start carving?
What are some basic items needed to get started? I read about 4 of the
most basic tools....how about a good book you can recommend for the
beginner? Where do I get the wood? And so many different types of
wood! It is something she is asking Santa for and I have no idea where
to start shopping or looking...so hopefully you can help!
Thanks!
A Frazzled Mom

--- My Answer ---

Hi Frazzled Mom!

I really can't suggest what age is good to start carving as I believe it
would depend on the muscle control development, the size of the child's
hands, and their hand and eye coordination. So I think that you are the
one that will have to judge this. I would suggest for any child that
you get them either a carving glove which covers the wood holding hand
or an extra thick Terri cloth hand towel to protect that same hand.
Personally I use a towel both, doubled over, for the holding hand as
well as for my lap to catch the wood chips. A vice, which is used in
3-D carving, is great to hold the wood and will keep her hands away from
the knife edge. For relief carving, flat carving, you will want bench
claps or spring clamps to secure the wood plague to the work table.
Clamps will be available at your local hardware store, just tell them
what your daughter will be doing and what type of surface she will be
working on ... a table top, a small square of plywood for her lap ... 

The greatest danger in wood carving is to the holding hand. That's the
one that gets 'stabbed' because the knife slips on the wood and gets
imbedded in the thumb or index finger palm area of the holding hand.
So, please, be prepared because even the most experienced carvers
inadvertently stabs themselves once in a while!

First, I would browse the web for the wood carving badge instruction
pages for the Boy Scouts. They have a lot of great suggestions for
young carvers both in what to carve as well as how to carve. Basswood
and balsa wood are both excellent soft woods for a young carver to try
and are readily available at most hobby stores. Basswood is the best of
the two as balsa requires extremely sharp edged tools. Learning to keep
the tools properly sharpened is one of the hardest lessons for the new
carver. Avoid any form of hard wood as maple, walnut, or pine and don't
use scraps of wood that are laying around the workshop or house. 

Ivory soap has long been a carving media for a beginning carver as well.
Soap carves much the same as the softer woods, is easy to find, and
makes wonderful gifts for the family when the carver has transformed
them into different delightful shapes. It's a great learning media then
the new carver can move onto the wood forms. Linoleum blocks that are
used in print making also make a wonderful media for a new carver. They
require only a simple line design carving then ink is rolled on top of
the block to print greeting cards. So you get two hobbies out of one
work. www.dickblick.com sells linoleum blocks and ink.

I would add plasticine clay to the new carver's media as well. This is
a plastic clay that never dries out. So you can work on a sculpture
today, set it aside for a week, and return to it and begin work again.
With plasticine once the carving is done a cast is made and plaster used
to cast copies of the original work. This means that you can make one
carving, create a cast (which is a lot of fun to do in itself) then make
a whole bunch of statues from that cast. Plasticine is also available
through Dick Blick.

Personally I would get a basic bench knife and a set of Japanese Long
Handle carving tools. This would give her all the different carving
profiles that she needs while keeping the cost down until you and she
discover if this is something that she will want to continue. Plus there
would be enough tools that both of you could carve at the same time,
sharing the tool set. I would highly suggest that you plan to carve
with her. First, of course, is the concerns for her safety so you will
want to be present as she learns her new hobby. Second, and maybe even
more important, it can become something the two of you share in both
time and interest which will greatly increase her joy in the craft.

Instead of a book I would suggest going through our website and reading
some of the online tutorials we have. Our books are gears to an older
carver but you might try www.foxchapelpublishing.com for other book
ideas. They are my publisher and print about 600 different titles.

---

Thanks everyone! Susan Irish

Carving Patterns Online
Designs Online Since 1997!
Classic Carving Patterns By L.S.Irish
http://www.CarvingPatterns.com
http://www.WoodCarvingPatterns.com

_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver

Lynn E. Diel
Columbia, MO
Website: http://carvers-creek.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20041210/05aa5d17/attachment.html