[Woodcarver] Tool Organizing

[Clive Goss]

Hi all,
I have to agree with Bob, I had two magnetic bars holding my carving tools
to the wall, and within a short time they were magnetized, and proved
difficult to sharpen due to the filings clinging to the end of the blades.
I now use them for my screwdrivers only.
Take care,
Clive.


> When you sharpen you spend time trying to remove the wire burr.
> The last thing you want to do is magnitize your chisels so that can pick
up small iron particles that lie around the shop that act the same as a burr
wood.  Take a screw driver magnetize it then dip it in iron filings and see
how hard it is to get theose iron filings off the end.
>
>  I humbly suggest that you don't use magnets.
> Bob Mau
> Big Rock Il
>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver