[Woodcarver] Wood Mold & Pear Trees

[Steve Lankerd Sr]

Another suggestion is check with hardware stores or lumber yards or
even sawmills.  In my 25 years of working in sawmills, we always used
a wax based end seal for our cants and lumber.  I can't remember the brand
but one of these places should know. This comes colored or opaque.

Steve.....


Steve Lankerd Sr.
Metlakatla,  Alaska
Northern Lights Handcrafted Gifts

http://www.angelfire.com/ak5/northernlights



----- Original Message ----- 
From: "Joe Dillett" <jdillett at thecarvingshop.com>
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Sent: Tuesday, January 13, 2004 4:42 AM
Subject: Re: [Woodcarver] Wood Mold & Pear Trees


> To make a DONATION to the List using PayPal OR regular mail, click this
link: http://wwwoodcarver.com/WWWList/WWWList.html
> What's the best way to seal the ends ?
> just any paint or what?
> **********************
> I like to seal the ends with polyurethane varnish.
>
> Joe Dillett
> The Carving Shop
> 645 E. LaSalle St. Suite 3
> Somonauk, IL. 60552
> (815) 498-9290 phone
> (815) 498-9249 fax
> http://www.thecarvingshop.com
> jdillett at thecarvingshop.com
> http://www.carvingmagazine.com Carving Magazine web site and Readers Forum
> **************************************************
>
>
>
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver
>