[Woodcarver] re sharpening

[Joe Dillett]

Hi Wittler,

A coarse and fine stone with a strop and buffing compound is all you need.
It will all amost fit in your pocket.

In Issue #2 of Carving Magazine I have an article on the basics of sharpen
with the stones and strop. Maybe you can try and dig up a copy of that
article. If not email me off list and I'll see if I can get you a copy.

Joe Dillett
The Carving Shop
645 E. LaSalle St. Suite 3
Somonauk, IL. 60552
(815) 498-9290 phone
(815) 498-9249 fax
http://www.thecarvingshop.com
jdillett at thecarvingshop.com
http://www.carvingmagazine.com Carving Magazine web site and Readers Forum
**************************************************

----- Original Message -----
From: <Wittler60 at aol.com>
To: <woodcarver at six.pairlist.net>
Sent: Friday, May 21, 2004 10:06 PM
Subject: [Woodcarver] re sharpening


> To make a DONATION to the Mailing List using PayPal OR regular mail, click
this link: http://wwwoodcarver.com/WWWList/WWWList.html
>


----------------------------------------------------------------------------
----


> I liver in a retirement community so space is very limited, Does any one
know
> a good way to sharpen tools by hand? Especially gouges and v gouges.
>


----------------------------------------------------------------------------
----


> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver