[Woodcarver] Relief carving question

[Bill Smith]

hi john what I do use when I make something this large
and I made many of them this size with a mirror on the
back of it n not the light weight mirror I take a
board and run it down the table saw and put it on a 45
degree angle so that the nails are in the wall and the
carving is still only hangin from the board that is a
running board from one end to the other end and screw
it in as well as glue it which will keep it from
fallin

Bill
--- John G <gris7 at juno.com> wrote:

> DONATIONS to the Woodcarver Mailing List can be made
> using PayPal OR regular mail. Click this link:
> http://wwwoodcarver.com/WWWList/WWWList.html
> 
> Hi all
> I plan to make a relief carving for my church, and I
> am concerned about how to hang it.  
> 
> It will be about 4 foot square - 3 inches thick -
> butternut or basswood.  What can I attach to the
> back to hang something this size? I’m worried that a
> screwed fastener will pull out due to the weight of
> the wood.
> 
> 
> 
> God Bless,
> JohnG
> 
> See my carvings at 
> http://www.PictureTrail.com/jgriscti
> 
> _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver
> 



		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - What will yours do?
http://my.yahoo.com