[Woodcarver] Gluing some carved pieces to stained glass

[Bill Smith]

hi ed what I would recomment to u to use is a silcone
which will change with the weather and would not
effect the glass as it can be used with a mirror will
find it in home depot, plus it is clear

Bill
--- Edswood at aol.com wrote:

> DONATIONS to the Woodcarver Mailing List can be made
> using PayPal OR regular mail. Click this link:
> http://wwwoodcarver.com/WWWList/WWWList.html
> > Here's a question for all you knowledgeable
> craftspersons out there. As a 
> special present for a dear friend who recently lost
> her mother, I had a 
> stain-glass craftsperson friend create a "memorial"
> type stained glass window that I 
> have framed in cedar.  I  carved a cross and
> stylized bird out of cedar and want 
> to attach both pieces to the glass.  I don't know
> what type of adhesive to 
> use. I'm afraid that if I use the wrong stuff it
> could cause the glass to break 
> if the wood contracts or expands. I thought maybe
> some type of silicone would 
> be in order but again, I'm not sure. The glass is
> absolutely beautiful and if 
> it cracked I'd be heartbroken. Any ideas or
> suggestions?
>   Thanks!!
> Ed F.
> > _______________________________________________
> Woodcarver mailing list
> Woodcarver at six.pairlist.net
> http://six.pairlist.net/mailman/listinfo/woodcarver



		
__________________________________ 
Do you Yahoo!? 
All your favorites on one personal page – Try My Yahoo!
http://my.yahoo.com