[Woodcarver] Margin Printing Errors

[Byron]

-----Original Message-----
From: Jean Athey <atheyjm at yahoo.com>

Hello,
I've run into a problem printing out patterns in Paint
Shop Pro. If I try to print a drafted or scanned-in
pattern that is, say, 7x9 inches in the landscape
view, the right margin is somehow set at about 2-1/2
inches and that side of the image is cut off (even in
the Print Preview window, not just as a finished
product). Doesn't happen in other programs, so am
guessing it's not a Windows problem, but a PSP issue.
I've tried changing the "Page Setup" from "Fit To
Page" to "Center On Page". I've tried manually setting
margins. Nothing seems to change this apparently
default setting, yet the "Preferences" area says auto
for standard 8-1/2x11 paper (which is what I need.)
Can't be carving folks with their legs cut off, or
headless animals, so appreciate any ideas from Paint
Shop Pro users or techies--off-line, please, so we
don't clog up the public bytes.
Thanks, as always, for your suggestions....
Jean


Jean,

My guess is that the problem is with the scanned image.  Suggest that you look at the picture in Paint Shop Pro. (I use Paint Shop Pro quite a bit). Then crop out all the "white" space.  Again, I'm guessing that the problem is with the  size of the scanned image. 

Byron