[Woodcarver] Gorilla Glue

[Ramsey]

-- 
Hi Joe,

I disagree about Gorilla Glue being good for spanning wider glue 
joints.  It does fill in because it expands but the foam has no 
structural integrity.   After several glue failures, I stopped using 
Gorilla Glue.  It only  works well for very tight fitted joints.

Ron Ramsey
http://www.carvedbyramsey.com


Joe Dillet wrote:

"Gorilla Glue is better for spanding a wider glue joint if the two 
surfaces are not
perfectly matched."