[Woodcarver] Color from sanding pads

[Old Joe]

Sometimes it helps to run the pads at slower speeds.

The best pad to use with least color residue is 3M 7440, very coarse. It is much harder than the others.  Old Joe

Old Joe, Plattsmouth NE  WebShots: http://community.webshots.com/user/woodcarver25

Join Mail List: http://groups.yahoo.com/group/woodcarvingfun/join

Len Dillon: www.diamondd.org
  ----- Original Message ----- 
  From: bOB 
  To: woodcarver at six.pairlist.net 
  Sent: Friday, July 08, 2005 10:30 AM
  Subject: [Woodcarver] Color from sanding pads


  DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



------------------------------------------------------------------------------


  I recantly used an abrasive weel on the dremmel. After I finished I noticed the color deposits from the color of the wheel. I tried goofoff to remove the color, but not much improvement. Can anyone help?

  Thank you
  Bob Jump


------------------------------------------------------------------------------


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050708/1206f89e/attachment.html