[Woodcarver] Color from sanding pads

[Bill]

:) :)

My pads are the ones that are for hand sanding.. and they leave pink or green all over my carvings.

Bill
  ----- Original Message ----- 
  From: Old Joe 
  To: [Woodcarver] 
  Sent: Friday, July 08, 2005 12:43 PM
  Subject: Re: [Woodcarver] Color from sanding pads


  Sometimes it helps to run the pads at slower speeds.

  The best pad to use with least color residue is 3M 7440, very coarse. It is much harder than the others.  Old Joe

  Old Joe, Plattsmouth NE  WebShots: http://community.webshots.com/user/woodcarver25

  Join Mail List: http://groups.yahoo.com/group/woodcarvingfun/join

  Len Dillon: www.diamondd.org
    ----- Original Message ----- 
    From: bOB 
    To: woodcarver at six.pairlist.net 
    Sent: Friday, July 08, 2005 10:30 AM
    Subject: [Woodcarver] Color from sanding pads


    DONATIONS to the Woodcarver Mailing List can be made using PayPal OR regular mail. Click this link: http://wwwoodcarver.com/WWWList/WWWList.html



----------------------------------------------------------------------------


    I recantly used an abrasive weel on the dremmel. After I finished I noticed the color deposits from the color of the wheel. I tried goofoff to remove the color, but not much improvement. Can anyone help?

    Thank you
    Bob Jump


----------------------------------------------------------------------------


    _______________________________________________
    Woodcarver mailing list
    Woodcarver at six.pairlist.net
    http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/woodcarver/attachments/20050709/1cc76abc/attachment.html