[Woodcarver] June 2006 Fine Woodworking magazine article of interest

[Victor Hamburger]

The June issue of Fine Woodworking has arrived and it has an article some may be 
interested in.  It features a carving hold-down that has several neat features 
so it can hold relief carvings, thicker carvings like corbels, as well as 
holding molding for carving.  It is on page 76 of the magazine.

Also featured in the issue is an article on building mantels, sharpening chisels 
(flat) with abrasive paper, and a bit about clear water-based finishes.

If you can't find or afford the magazine on the newstand, check larger libraries 
for the issue.  You can preview the article here: 
http://www.taunton.com/finewoodworking/pages/fw_184_076.asp

enjoy!	Vic H